Open Question

I cannot get my pictures off of my camera to my computer. I can see my pictures on my camera but when I try to open them on my computer it says that there are no files available. How can I get my pictures on my computer? I've tried putting my memory card in the computer and also using my USB cord...

Posted by on


6 Suggested Answers

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 135 Answers

SOURCE: casio ex-S500 memory full

Check the card to make sure it isn't "locked". SD cards have a tiny switch on their side which write protects them. If the card is "locked", then the camera can't write to it. See for a picture of the locking mechanism. If this is not the problem, you can try reformatting the card. Although you can format it in your computer, it is much better to format it in the camera itself, since they are often finicky about the formatting details.

Posted on Mar 18, 2007

  • 374 Answers

SOURCE: Internal Memory

It is possible. Go in where you can see your pictures and then press menu. Go down to copy and press right arrow. Highlight internal to memory card and press set. Should copy them onto your memory card for ya. :)

Posted on Mar 30, 2008

  • 71 Answers

SOURCE: Lost computer cord

Buy an USB SD card reader. You will love it, downloading pictures to computer gets faster and easier.

Posted on Oct 30, 2008

  • 246 Answers

SOURCE: save from internal memory to memory card?

On play mode, press MENU, on PLAY tab-->COPY-->BUILD-IN->CARD, press SET,then wait until the "Busy...Please wait.. disappears.

Posted on Jun 30, 2009

  • 11967 Answers

SOURCE: I have a casio excilum ex-z100. Recently I

Your computer uses a different writing system than you camera does...therefore, your camera cannot recognize the files your computer wrote to the card.

Posted on Apr 08, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why when I open the picture files on my computer does it display windings and no access to pictures?

Perhaps your computer driver, or the computer software is damaged?
Try to reinstall the software that came with the camera.

May 06, 2014 | Sony Cyber-Shot DSC-F828 Digital Camera

1 Answer

My computer quit reading the card or the camera, so I can't get pictures from the camera onto my computer

Try removing theSD memory card from your camera and inserting the SD memory card into an USBmemory card reader then connect the USB card reader into the USB port of aworking computer. The computer will see this USB card reader and SD memory cardas an external storage device. You can open the camera photo folder and copythe photos to your computer.

Apr 13, 2012 | Nikon Coolpix S4000 Digital Camera

1 Answer

I have a Kodak EasyShare C195 Digital Camera. I have pictures stored on the camera (on the removable card) I want to view those pictures on my computer. I downlodaed the EasyShare Software from the...

Try using Windows instead of Kodak. With your camera plugged in and on open my computer and see if your camera is listed. If it is you can click on it press control and a to select all of the pictures, control and c to copy them, then open my pictures and press.control and v to paste them. If you don't see your camera listed open control panel, devices, scanners and cameras, add/find camera, follow the prompts to add your camera.

Jul 30, 2011 | Kodak C195 Digital Camera

1 Answer

I have the Sony Cyber_Shot 7.2 mega pixels. My problem is, when trying to put the pictures onto my computer, the only that pops up is the "safely remove hardware" option. I've done this many...

The computer can recognise the camera memory as a removable drive without actually recognising the camera as a camera. Try looking in "My Computer" for an extra drive (Under "Devices with Removable Storage") and opening that. There should be directories with picture files in that you can drag to your desktop.

It may be that your camera driver has stopped working for some reason. You could try to reinstall it, but you don't really need this just to get pictures onto your computer. Usually the "Camera and scanner" installation is for using the camera as a webcam.

Oct 30, 2010 | Sony Cameras

1 Answer

I am trying to download photos to my pc. All plugged in the the Device Connected box ins blank. Any ideas - its driving me nuts!

OK, when I use my Kodak Easy share cameras on a fresh computer that hasn't downloaded Kodak pictures before I do the following:

Load Easyshare software onto the machine, and install it.

Then, I connect the camera to the computer.

Then, I open the Easyshare software and it may ask a few questions.

Next, I watch the computer (Windows 7) as it loads the proper driver for my camera.

Finally, I click on transfer pictures and I am set with my pictures.

The pictures should show up in the Start Menu's picture under Kodak Pictures.

You should be done.

Let me know how it works out with the Easyshare software downloaded to the computer before trying to load pictures on to the computer.

Jul 10, 2010 | Kodak EasyShare C633 Digital Camera

1 Answer

I'm trying to download pictures from my camera to computer

plug in the camera using the USB cable and open up the memory card via my computer and manually copy the pictures to whatever folder you want on your computer...

you could also use the program that comes with the camera, I have not tried this yet so i do not know the steps to take using the program to get your pics off the camera...

Jan 30, 2010 | General Electric A1250 Digital Camera

1 Answer

How to take pictures with a vivitar mini digital camera and store the photos on my computer


To connect the Vivitar camera to a computer with Windows XP and following versions of Windows, or a Mac, all you need is an USB cable fitting the camera. This cameras are detected without installing dedicated software or drivers.

About one minute after connecting the camera, the computer will detect the device, and install automatically the camera, that will be seen as an external hard drive.

At that point, open My computer. You will see that an additional external USB drive had been installed.

The new external drive will be the camera itself, open it and open the folder in the drive to find the picture file.

Use the Windows copy and paste function or a dedicated software to copy the files into the My Pictures folder in your computer. You find My picture inside My document folder.

Note. if the camera is not recognized, then this model may need Vivitar driver (usually they do not). In that case download the software from the Vivitar website below, or give us the complete model, or contact Vivitar.

Here also Vivitar software to manage the pictures. Try both ways: VIVITAR we make it easy! | Homepage

Jan 30, 2010 | Computers & Internet

2 Answers

My memory card is full and I want to transfer to my computer. I tried to transfer to internal memory but it says there isn't enough space. Anyway to transfer all at once instead of tagging individual...

Connect you camera to the computer using the USB cable. It will be shown as a removable drive(If the autorun is enabled windows should list the option to transfer pictures.Choose this option if it does so). Open the drive and and transfer the pictures to your computer.

Hope this helps,

Dec 24, 2009 | Kodak ZD710 Digital Camera

1 Answer

I have a new computer and I have lost any software for my canon powershot a700 digital camera. When I connect my camera to my computer I am unable to access the pictures? Do I need to download software?

windows has its own scanner/camera wizard.
it should start up automaticly when you plug in your camera.
try a different usb port.
otherwise plug in the camera to your computer and then go to "my computer" and look for a icon that corrosponds with your camera. then open it and open the folders in that directory until you find your pictures.

I’m happy to help further over the phone at

Oct 23, 2009 | Canon PowerShot A700 Digital Camera

3 Answers

How to delete all the pictures on my camera.

re format you memory card in camera it should be in menu then settings then memory try it

Aug 15, 2009 | Sony Cyber-shot DSC-S700 Digital Camera

Not finding what you are looking for?

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Audio Players & Recorders Experts


Level 3 Expert

3156 Answers

Tom Chichester

Level 3 Expert

54132 Answers

Brett Duxbury
Brett Duxbury

Level 3 Expert

4290 Answers

Are you a Casio Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides