Question about Computers & Internet

Open Question

How do I get software for Linksys -G- router - Computers & Internet

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 196 Answers

SOURCE: Software Firewalls and Linksys Routers

You can never have too much security, however there are some firewalls that will not work with hardware firewalls, that includes the all Linksys Routers . Keeping this in mind, some software firewall will continue working after the router is installed. If it does, it shouldn't need to remove it, because it's an extra layer of security. However if there are difficulties using the Internet with the Software firewall after installing the router, try disableing it to see if internet is accessable. If the internet works after disabling the software firewall, then remove the firewall.

Posted on Feb 16, 2006

Ad
  • 196 Answers

SOURCE: Software Firewalls and Linksys Routers

You can never have too much security, however there are some firewalls that will not work with hardware firewalls, that includes the all Linksys Routers . Keeping this in mind, some software firewall will continue working after the router is installed. If it does, it shouldn't need to remove it, because it's an extra layer of security. However if there are difficulties using the Internet with the Software firewall after installing the router, try disableing it to see if internet is accessable. If the internet works after disabling the software firewall, then remove the firewall.

Posted on Feb 16, 2006

  • 196 Answers

SOURCE: Software Firewalls and Linksys Routers

You can never have too much security, however there are some firewalls that will not work with hardware firewalls, that includes the all Linksys Routers . Keeping this in mind, some software firewall will continue working after the router is installed. If it does, it shouldn't need to remove it, because it's an extra layer of security. However if there are difficulties using the Internet with the Software firewall after installing the router, try disableing it to see if internet is accessable. If the internet works after disabling the software firewall, then remove the firewall.

Posted on Feb 16, 2006

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Router will not connect to the internet, happens quite frequently and everytime I have to do a reset and configure it all over again, is there something that can be done


Usually, this means either a firmware update is needed, or the router is failing. Click here to go to the Linksys WRT54G support page to download and install the latest firmware. If this doesn't solve it, it may be time for a new router. Hope this helps.

Regards,

Matt

Apr 14, 2011 | Linksys Wireless-G WRT54G Router

4 Answers

How to setup linksys router


You can setup Linksys router without installation CD or software.
Connect the computer to the router and open the setup page of the router.
Change the Internet and wireless settings manually.
I will suggest you a website on How to setup Linksys wireless router.
This website may help you installing your router

May 28, 2010 | Linksys Wireless-G Broadband Router

2 Answers

I need installation software for a linksys WRT54G2 V1 Router my friend gave me for my birthday but he didn't have the CD


router do not normally need installation software..

you can access their admin software by putting in the ip address into your browser...

if you are running xp go to start > run and type in "cmd"..

when you get the black DOS screen, type in "ipconfig" and look at the results for the ip address of your "Default Gateway"..

go back and type this into your web browser to access the router...

for linksys the default password is admin, leave the username blank

Aug 16, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Load disk


You can download the software from linksys.com/download. The router can be setup without the software

May 27, 2009 | Linksys BEFW11S4 Wireless-B Broadband...

1 Answer

Linksys wireless-b router locks up


It could be a software problem, you can try updating the software or it's firmware.

Sep 25, 2008 | Linksys BEFW11S4 Wireless-B Broadband...

3 Answers

Where can I get software for a wireless router, model WRK54G?


http://www.linksys.com/servlet/Satellite?c=L_CASupport_C2&childpagename=US%2FLayout&cid=1166859938305&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=3830545678B04&displaypage=download
Make sure you have the router and choose the right version number for you router then you can download the software for it..

May 30, 2008 | Computers & Internet

2 Answers

Software


Linksys routers do not require any software to be installed on a PC. What model Linksys do you have?

Nov 03, 2007 | Computers & Internet

1 Answer

Software Firewalls and Linksys Routers


You can never have too much security, however there are some firewalls that will not work with hardware firewalls, that includes the all Linksys Routers . Keeping this in mind, some software firewall will continue working after the router is installed. If it does, it shouldn't need to remove it, because it's an extra layer of security. However if there are difficulties using the Internet with the Software firewall after installing the router, try disableing it to see if internet is accessable. If the internet works after disabling the software firewall, then remove the firewall.

Feb 16, 2006 | Linksys EtherFast Cable/DSL and Voice...

3 Answers

Software Firewalls and Linksys Routers


You can never have too much security, however there are some firewalls that will not work with hardware firewalls, that includes the all Linksys Routers . Keeping this in mind, some software firewall will continue working after the router is installed. If it does, it shouldn't need to remove it, because it's an extra layer of security. However if there are difficulties using the Internet with the Software firewall after installing the router, try disableing it to see if internet is accessable. If the internet works after disabling the software firewall, then remove the firewall.

Feb 16, 2006 | Linksys BEFSR11 Router

2 Answers

Software Firewalls and Linksys Routers


You can never have too much security, however there are some firewalls that will not work with hardware firewalls, that includes the all Linksys Routers . Keeping this in mind, some software firewall will continue working after the router is installed. If it does, it shouldn't need to remove it, because it's an extra layer of security. However if there are difficulties using the Internet with the Software firewall after installing the router, try disableing it to see if internet is accessable. If the internet works after disabling the software firewall, then remove the firewall.

Feb 16, 2006 | Linksys EtherFast Cable/DSL Router

Not finding what you are looking for?

Open Questions:

Computers & Internet Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Ekse

Level 3 Expert

13434 Answers

Alun Cox

Level 3 Expert

2679 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...