Question about HP DeskJet 3940 InkJet Photo Printer

1 Answer

Light blinking My HP 3940 was printing a print job, it printed some pages and afterwards it stopped printing and the power light started blinking. I thought that cartridge was damaged (I was using only black cartridge, there was no color cartridge present in the printer) so i replaced it, but still the same problem is there. Please suggest a solution. Thanking you.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Sounds like you have a paper jam somewhere. Open up the printer and look for some paper. If the page is still in the machine, sometimes you can gently pull ever so slowly and finish getting the paper out of the machine. Power cycle the machine and if it was a jam, you should be fine.

Posted on Jun 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

If I am not printing continuously, the printer does not print the first 5-6 printing jobs. When print job sent to the printer I get a blank page (printing job can be more than one page). After the blank...


Hi there,
It seems that " Print on both sides (Manually)" is selected in printing options., when you want to print any document Go to file Print > select printer and click properties and disable the Manual printing option in device settings.
You should be able to get printing without errors,
if the option is not checked then check for the default paper tray,
save the settings and reboot your laptop/desktop and restart printer as well so that settings should work properly and any given command gets clear from memory, If these all settings are ok, Uninstall the printer driver and download the latest version drivers from HP website and install see links below
hp LaserJet 1150/1300 printing system hp LaserJet 1150/1300 PCL5e driver

If you require more assistance feel free to reply to this post
Regards, BA

Jan 14, 2011 | HP LaserJet 1150 Printer

1 Answer

The green power button blinks continuously and the printer will not print any type of job. The last job printed was very clear so I don't think I need a new ink cartridge. The status of the printer shows...


ya u need now inkjet cartridge or ur printers card dead 1st chack put black cartridge in ur printers and color cartridge out then see green light blinks if blinks black cartridge out and color cartridge put in the printers then u know thanls

Jul 03, 2010 | HP DeskJet 3940 InkJet Photo Printer

1 Answer

Solid orange light and blinking green lights


To check the light Pattern of your printer

Click on Light and Error HP Laser jet 1012 Printer

Check the error details from the above link

Condition of the printer Action/Description Ready

The printer is ready to print. No action is necessary. Processing

The printer is receiving or processing data. Wait for the job to print. Processing...(job name) Ready LED is blinking.

This message is displayed while the printer is processing a current job, but has not begun to pick pages. Processing...(job name) From Tray XX Ready LED is blinking.

This message comes up for any job, once the printer starts to pick paper. Manual Feed or Continuable Error

The printer is attempting to Manual feed, media is not loaded in the paper tray, media loaded is the wrong size or type. Verify that the correct media is loaded.

Press and release the GO button to continue printing. Out of memory

The printer is out of memory. The page you are printing might be too complex for the printers memory capacity. Try lowering the resolution. See Understanding print quality settings for more information. Door open, media out, no print cartridge, or media jam

The printer is in an error state that requires operator intervention or help. Check the following:
  • The print cartridge door is completely closed.
  • Media is loaded.
  • The print cartridge is correctly installed in the printer.
  • There is no media jam.
Printer initialization

A printer initialization is taking place. No action is necessary. Fatal error

All lights are on.
  • Unplug the printer for 30 minutes, and then plug it back in.
  • If the printer still has an error, contact HP Support.
All lights are off.
  • Verify that the printer is turned on.
  • Make sure that there is power.
  • Unplug both ends of the power cord, and plug them back in.
Job Cancel

All the LEDs cycle. Canceling...(job name)

The Job Cancel button was pressed and the job is aborted. Power ON

All the LEDs cycle. Checking Paper Path and Checking Printer

This only occurs at power up. Cleaning mode/Engine test

A cleaning page or engine test page is printing.

All the LEDs cycle. Cleaning Page prints

Wait until the cleaning page is finished printing and the printer is in Ready mode. This could take up to two minutes.

Wait until the engine test page is finished printing and the printer is in Ready mode. Clearing Event Log

All the LEDs cycle.

This will happen automatically during an NVRAM Init and a cold reset. No message will be displayed. No Action is Necessary. Power On

Initializing

This occurs when the product is powered on and coming out of EDOS. No Action is Necessary.



Jan 03, 2010 | HP LaserJet 1012 Printer

2 Answers

One of my members has an HP Deskjet 3650 and it


See this article to resolve the blinking lights. Then see this article and possibly this one to clear the print queue. You may have to cancel an active print job to remove it, or reboot the computer. Here is the home support page for that model printer, should anyone have further questions or need more information.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

Aug 25, 2009 | HP DeskJet 3650 InkJet Printer

1 Answer

Hp deskjet 3940 will NOT print


printer is om light is on not blinking and not printing

Feb 19, 2009 | HP DeskJet 3940 InkJet Photo Printer

1 Answer

Light blinking


Click HERE for help with solving your problem.

Jun 07, 2008 | HP Officejet 5610 All-In-One InkJet...

1 Answer

Printer cartridge container doesn't stop in the middle


It appears that the injection may have been lethal, it was still using the ink that it carries in its tubes then it mixed with the injection and is now blocked \ faulty. To repair it you could try getting a new set of HP inks.

Oct 20, 2007 | HP DeskJet 3940 InkJet Photo Printer

Not finding what you are looking for?
HP DeskJet 3940 InkJet Photo Printer Logo

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96467 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...