Question about Fuji Digital Cameras

Open Question

I have a FinePix F610, when I go to take a picture I get a hand symbal on the screen, and also blurred photos. can anyone help, please

Posted by on

6 Suggested Answers

  • 1 Answer

SOURCE: fuji finepix f610

If you will sell me a cradle for your faulty camera I will be happy, my phone nr 02089656399 Hanna.

Please call me ASAP I'm going on holiday on Thursday morning.

Posted on Apr 06, 2008

  • 370 Answers

SOURCE: pink screen and blurred pictures

The problem is with the CCd ..... Kindly get it replaced ...

Posted on Nov 14, 2008

  • 1 Answer

SOURCE: ZOOM ERROR ON FUJI FINEPIX J10

Mine did this too, and the lens cover only opened half way. I used a cotton wool bud to push the lens cover back and held it back until the lens clicked into place, turned it off and on and then it was fine

Posted on Mar 21, 2009

Steve5
  • 423 Answers

SOURCE: blurred pictures on fuji finepix J15fd

This is the camera shake warning, and thus the blur. It is suggesting you are using too slow of a shutter speed for the lighting conditions. The flash should be set to "auto" in order that it will automatically fire if the light is insufficient. Check your flash settings to make sure it's not set to "slow-sync" or "fill-in" settings.

Posted on Apr 06, 2009

  • 65 Answers

SOURCE: how can i use my finepix f610 camera as a web cam

install it on a computer

Posted on Jul 12, 2009

  • 244 Answers

SOURCE: have a fujifilm finepix s1000fd and when I use

Your cameras focus lens is probably stuck.
It operates via a long metal rod, a pin which follows a track in the side wall of the lens and a tensioned spring. one or more of these has probably jammed causing the focus lens not to move when you zoom.
Unfortunately for this camera, if you cannot free it by switching on/off, tapping the lens etc, you will have to strip the camera down to get at the lens unit. you will have to discharge the flash capacitor before desoldering the control board from the main board before removing to access the lens.
Recommend you find someone who knows about this or send to Fuji.

Posted on Apr 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After taking a picture lines appear on screen


Hi,
This problem is of firmware of the memory card, it has corrupt and needs replacement because it can't be repair. To confirm this, put the memory card out from camera and take snaps which will store on built-in memory of the camera and then shift it to the computer.
Thanks.

Nov 26, 2009 | Fuji FinePix F610 Digital Camera

1 Answer

Blurred pictures on fuji finepix J15fd


This is the camera shake warning, and thus the blur. It is suggesting you are using too slow of a shutter speed for the lighting conditions. The flash should be set to "auto" in order that it will automatically fire if the light is insufficient. Check your flash settings to make sure it's not set to "slow-sync" or "fill-in" settings.

Apr 06, 2009 | Digital Cameras

1 Answer

A "hand" symbal appears when I take pictures.


Fortunately I was able to locate my owner's manual. On page 82 of the manual it depicted the warning display that concerned me. The explanation: Tjere is a stronge liklihood of camera shake because the shutter speed is slow. Remedy: Use flash photography. However, use a tripod for some scenes ans modes.

Thanks so much for your prompt respond to my issue of concern.

Mar 27, 2009 | Fuji FinePix A345 Digital Camera

1 Answer

Pink screen and blurred pictures


The problem is with the CCd ..... Kindly get it replaced ...

Nov 14, 2008 | Fuji FinePix A403 Digital Camera

1 Answer

Shaky hand symbol and bad quality photos


good day,

to disable/enable the "shaky hand" symbol of your camera, just select the Picture Stabilization icon on the dial on top of the FinePix F30.

i hope this helps.

Oct 12, 2008 | Fuji FinePix F30 Digital Camera

1 Answer

Blurred picture


either there is dust on the lens internally or there is a battery problem.
check out this.
thanks.

Sep 30, 2008 | Fuji FinePix A345 Digital Camera

2 Answers

Photo's blur alot


Blurness doesn't happens because of the number of the pixels in the cameras.
Is the picture on the computer screen blur/the cameras screen or the lens hole?

I suggest you to set the camera on Automatic station (red camera on the wheel) in day light,try to stay still see how blur the photos are when you are not playing with the parameters. it it's still blurry it could be the pulley block next to the -eyepiece. roll it until it's not blur.

goodluck

Jun 26, 2008 | Panasonic Lumix DMC-FZ5 Digital Camera

2 Answers

Fuji finepix f610


If you will sell me a cradle for your faulty camera I will be happy, my phone nr 02089656399 Hanna.

Please call me ASAP I'm going on holiday on Thursday morning.

Apr 03, 2008 | Fuji FinePix F610 Digital Camera

1 Answer

"Shake" warning symbol won't leave screen.


That shake warning will appear whenever the camera is in a low-light situation where the shutter speed is low and the images may blur. If it's coming on even in bright light, maybe you set the shutter speed to a fixed low setting? Either way, you may be able to shut off the warning in the settings of the camera.

Aug 17, 2007 | Fuji FinePix A345 Digital Camera

Not finding what you are looking for?
Digital Cameras Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fuji Digital Cameras Experts

kakima

Level 3 Expert

96518 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Tony

Level 3 Expert

2598 Answers

Are you a Fuji Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...