Question about JVC AV-56WP74 56" Rear Projection HDTV-Ready Television

1 Answer

Help with jvc projection

We woke up after the storm and our tv was out of focus the red. we did auto focus and still nothing will happen what do we do?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • JVC Master
  • 8,617 Answers

You will need toreplace both convergence Ics they are STK392-110 ICs you can get replacement ICs at the following link with instalation instructions.
http://servicemanuals.vstore.ca/

Posted on Jun 07, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We went to auto focus on our tv. It shook wildly the when the picture came back the picture is bent. When looking inside the tv the green and red are being projected bent at the top and bottom. Please...


You need to replace the convergence IC stk392 -110...2 resistors and a fuse. located in the deflection board of your tv and after you can press auto focus and the picture will be normal.

Dec 18, 2010 | JVC AV-56WP74 56" Rear Projection...

1 Answer

Sony kp-57hw40 double picture. regular and the other right next to it is red. tried auto focus and nothing happens. while holding auto focus btton down get red cross and white next to it. tv is 9 years...


Auto Focus button no longer work.Tv have a problems known as a convergence problems,it dead.Tv have colors lnes R,G,B mis alignment,have colors shadows pictures or 3D pictures look alike.The tv convergence board have dead 2 STK convergence ICS and some or all of it resistors too.These parts,must be replaced on the tv convergnce board to solved the tv pictures convergence problems.The shop,will cost u like $300-350 for parts and labors.

Nov 13, 2010 | Sony KP-57HW40 57" Rear Projection...

1 Answer

JVC AV-48WP30: CONVERGENCE PROBLEM!!! HELP!!!


U have convergence board issues. Sometimes over time the solder joints on the board go bad or develop minute breaks. U might try removing the board and resoldering every thing you can get it. U can also consider baking the board in an oven at around 270 degrees for about 8 minutes to melt all of the connections on the bottom of board.
Then remove, allow to cool, cross your fingers and see what happens.

May 05, 2017 | JVC AV-48WP74 48" Rear Projection...

1 Answer

JVC I'Art AV-56wp74


A repair facility will charge 400 to 600.00 for the repair. Or you can repair it yourself if you can solder. As both convergence ICs need to be replaced. They are STK392-110 you can get replacement ICs at the following link with free instalation instructions with pictures so you can do the repair yourself. Heres the link.
http://servicemanuals.vstore.ca/

Jun 15, 2008 | JVC AV-56WP74 56" Rear Projection...

1 Answer

TV won't turn on


Sounds like you have had a powersurge during the night.
The power supplies on both units will have to be inspected and repaired. The expense for this type of thing can grow rapidly depending on how much damage has been done.

Check your other appliances and see if they are all OK like the washing machine other tv's etc.

If there was any kind of storm activity during the night it could have also been a lightning strike to the antenna.

Hope that helps.

Apr 11, 2008 | JVC AV-56WP30 56" Rear Projection...

1 Answer

RED AND GREEN DOUBLE AND BLUR PICTURE HELP PLEASE


You have a convergence problem. Components are shorted out and must be replaced. Unless you're a technician, there's really nothing you can do at this point.

C-Dog

Feb 03, 2008 | JVC AV-56WP74 56" Rear Projection...

1 Answer

Wont turn off, goes to magic focus


enter your menu set up and turn off auto focus and see what happens then,also check your other settings while your there.

Sep 09, 2007 | Hitachi 51F500 51" Rear Projection...

3 Answers

JVC AV-56WP74


sounds like a power supply7 problem such as a power regulator is bad or maybe the Horizonbtal deflection cu8rcuity is defective. sounds like something if you ask me? should be taken care of by the pros??? Im sorry not being able to assist you better but these sets have hundreds of volts nin them and shoulnt be played with by an unauthoized service company.. Good Luck

May 19, 2006 | JVC AV-56WP74 56" Rear Projection...

Not finding what you are looking for?
JVC AV-56WP74 56" Rear Projection HDTV-Ready Television Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...