Question about ASUS AI Lifestyle P5N32-E SLI (P5N32-E-SLI-GREEN) Motherboard

1 Answer

No boot, continuous Beep

Hello,
I have following config with that motherboard: Intel E8400, CoolIt Freezone CPU cooler, DDR2 800 2 gigs, 2x 8600GT in SLI mode and 500W EarthMate PSU. After installing cooler for first time was not satisfied with CPU temps, and decided to change thermal compound to MX2. Took out and cleaned CPU, and installed it back. Put a bit much of paste on CPU and reinstalled the cooler. Now, when turning computer on I got no boot no screen and annoying continuous beep going for about 15 sec then pause then resuming for another 15 sec and of and on in cycles. Power is working, mobo led is on, all fans are working, cooler is working. Tried to clear CMOS with jumper - no luck. Would appreciate any help, comments. Very desperate.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,342 Answers

I would take the CPU back out. Remove the excess thermal compound, you should only use a very thin layer. Make sure the CPU is oriented and seated properly.

Posted on Jun 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to enable virtualization for Intel core 2 duo e8400?


the virtualisation capability is an option in the bios; that is where it can be anabled. To get into bios begin the boot up process and hit the delete button continuously. On some boards it is the F2 button but it should be the delete button on your board.
Remember to save the option on exiting.

Feb 19, 2015 | Intel Core 2 Duo E8400 Processor...

1 Answer

Continuous beep motherboard will not boot


check the battery for the mother board memory. flat battery can make it no startup. also if that is fine remover the hard drive lead and turn on if it comes on then the hard drive is causing the fault. do same with rom's.

Mar 24, 2014 | HP ECS ACER 946GZT-AM V1.0 SOCKET- LGA775...

1 Answer

When I press the power button of my CPU i hear 3 Continuous beeps which repeats thrice. Again the beeps come during the windows login. This beep was not there in the begining. It started recently. But...


It is true that your computer is working properly without any trouble.Three continuous beeps means that your keyboard component is not ready to input the data.That's why it is calling you as beeps.You might have to check your keyboard that it is attached with the CPU properly or not.

Apr 06, 2010 | ASUS M4A79 Deluxe Motherboard

1 Answer

My card XFX Nvidia 8600GT DDR3 256MB was working fine, recently it started to get heated up very quickly & burning like anything, now it wont even let my pc boot, i removed it & my pc boots up fine...


There is no need to go for another card just keep you pc well ventilated. and try to install some cooling fans in it. but if you want real cooling solutions then just purchase a coolermaster gpu coolers from the shops and i tell in the whole world that, they are the best company in producing CPU and GPU Coolers.

Feb 05, 2010 | XFX NVIDIA GeForce 8600 Graphics Card

1 Answer

MSI P6N V2 motherboard doesnt work with Core2Duo E8400


ur motherboard goes dead now only one solution have that u must change ur board . coz by overclocking ur motherboard vg chip gone burn and no one can change that chip .thanx enjoy good luck plz vote for my comments

Apr 20, 2009 | Computers & Internet

1 Answer

ECS G31T-M keeps rebooting problem system ECS G31T-M M/B Intel Video COMBO.. Intel Core 2 Duo E8400 Processor 3.0GHz (3.0GHz x 2) CPU 6MB L2 Cache 1333MHz FSB .. MassCool LGA 775 CPU Cooler /...


what was the software.... and if you can... boot into safe mode.... tap f8 when it starts it's boot up and remove the offending program....

Robert

Sep 06, 2008 | EliteGroup Computers & Internet

2 Answers

No signal


try taking out a gig of ram and then start computer.

Jul 03, 2008 | ASUS P5N-E SLI Motherboard

1 Answer

GA-EP35C-DS3R random reboots


Hi Buzznode,

First things first - once you have all the components properly seated (sometimes if a RAM chip or CPU heatsink/fan isn't quite right it'll cause those problems) clear the CMOS entirely. There should be a jumper somewhere near the CMOS battery - move it from the 1-2 seating to the 2-3 (with the system powered down) and count to ten. Move it back over and then try booting up again. If the problem continues, swap the memory chips. Otherwise repost once you've tried the recommendation.

Ben

Mar 07, 2008 | Intel Motherboard

Not finding what you are looking for?
ASUS AI Lifestyle P5N32-E SLI (P5N32-E-SLI-GREEN) Motherboard Logo

Related Topics:

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

David
David

Level 3 Expert

778 Answers

Are you an ASUS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...