Drivers for mp-F50 - MPMan MP-F50 MP3 Player

Do you have a USB programming cable for the radio? If not, get a USB to serial adapter and plug between the computer USB and serial programming cable. Adapter driver will help with the interface.

You can download the Canon printer drivers from theirsupport WEB site. Please click on this link and
select your model printer todownload :- http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct

"Replace printhead" to correct the subject issue? Only in your dreams!

The Canon i850 uses cartridges of type BCI-3. according to Canon, the color cartridges are compatible to:
BJC-3000 Series, BJC 6000, i450, i550, i850 Series, MultiPASS F30, F50, F60, F80, MP 700 and MP 730, S400, S450, S500, S520, S530D, S600, S630, S630 Network and S750.
The black one will work in a few more models.

Canon have not developed drivers for this product for the Vista platform.

Unfortunately Canon has decided not to create a driver for the F50 that is compatible with Vista they feel it would be too expensive to create a driver for an old model like the F series.

Sorry

Latset drivers are here.

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=334&modelid=6324

remove all cartridges leaving printhead intact.
close cover, turn off
turn on, let power up, error message should be gone.
open cover, reinstall cartridges
if you cleaned your print head like I did you'll probly
eventually end up getting a new one anyway, due to the color variations
but I can at least print text.

You may have to install updated drivers from Canon:
www.usa.canon.com/consumer/controller?act=SupportIndexAct
The last time I did this they were for Windows XP SP2. Also, XP is now on SP3 and there have been many security patches lately.
Sometimes "MP Service" does not start, so you have to manually start it by going to ControlPanel, then AdministrativeTools, then Services, then MP Service. However, you seem to have done that.

wadfdfa