Question about Canon FAX-JX200

1 Answer

Canon jx200 fax machine

I cannot receive a fax...it says stored in memory?? dont know how to retreive it

Posted by on

  • robo15 Jun 19, 2008

    aparece recibiendo en memoria impresion auto desactivada y no imprime Qué debo hacer?

  • Anonymous Jul 09, 2008

    fax stored in memory... but there are papers and ink

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Legend:

    An expert who has written 200 answers of more than 400 characters.

  • Expert
  • 359 Answers

The fax automatically turns off Auto Print and stores faxes in memory when either ink or paper is low. The memory will store up to 30 transmissions or 60 pages maximum, so it is important not to leave this too long if you have heavy transmission volume.

Faxes can be retrieved as follows.

If you want to choose only certain faxes to print:
1. Print a list of documents in memory for reference:
Press Menu. Use arrows (up & down) to select Memory Reference, then press Start/Copy. Use the arrows to select Doc Memory List, and again press Start/Copy.
2. Print a document from memory (using the list printed in #1):
Press Menu. Use arrows (up & down) to select Memory Reference, then press Start/Copy. Use the arrows to select Print Document, and again press Start/Copy. The LCD will show the first number in memory (e.g., TX/RX NO. 0001).

Use the arrows to choose the document you want to print, and press Start/Copy. The LCD will then toggle between "1st page only?" and "Yes=(*) No=(#)". Press * to print only the first page, or # to print all pages.
3. Delete selected document(s) from memory:
Press Menu. Use arrows (up & down) to select Memory Reference, then press Start/Copy. Use the arrows to select Delete Doc, and again press Start/Copy. The LCD will show the first number in memory (e.g., TX/RX NO. 0001).

Use the arrows to choose the document you want to delete, and press Start/Copy. [Note - if the arrows do not result in another number displaying, there is only one document in memory.] The LCD will show "Yes=(*) No=(#)". Press * to delete the document. Continue to select documents until each document you want to delete has been handled.

If you want to print all unprinted documents in memory:
1. If you want to have a list of documents in memory for reference before performing this procedure, to be sure you have them all, follow step 1 from the above procedure for printing selected documents.]
2. Press Menu. Use arrows (up & down) to select Memory Reference, then press Start/Copy. Use the arrows to select Print All New RX, and again press Start/Copy.
3. Delete all printed docs from memory:
Immediately after printing all documents, you will have the choice of deleting all documents. The LCD will display "Yes=(*) No=(#)". Press * delete all, or # to retain in memory.

To delete all documents at a later time:
Press Menu. Use arrows (up & down) to select Memory Reference, then press Start/Copy. Use the arrows to select Delete Printed RX, and again press Start/Copy. The LCD will display "Yes=(*) No=(#)". Press * delete all, or # to retain in memory. To finish then, press Stop.

If you need further assistance, please post back. Otherwise, thank you for using and rating FixYa!

Posted on Jul 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unable to remove on screen rec d in memory


Receiving Documents in Memory While Performing Another Task or When a Problem Occurs
If your fax is performing another task or encounters a problem when receiving a document, it
automatically stores the unprinted pages in memory, and the LCD displays MEMORY> as well as one or more messages. For an explanation of the message(s) and details
on the action to take, see page 64.
If you would like for me to send you the user manual, please send me an email to LBrown18062@hotmail.com Put CANON FAX JX200 as the subject and I will send it to you right away.

Oct 21, 2011 | Canon FAX-JX200

1 Answer

NEED TO TURN ON AUTO PRINT ON CANON FAX -JX200


You can enable memory receiving feature temporarily.
1 Press [ON/OFF] to select .
􀁺 The fax starts receiving documents in memory.
􀁺 To cancel, press [ON/OFF] again.

If you would like for me to send you the user manual for the JX200, please send me an email to LBrown18062@hotmail.com Please put CANON JX200 MANUAL in the subject line and I will send you the manual right away. Lawrence Brown

Oct 11, 2011 | Canon FAX-JX200

1 Answer

My fax machine is in auto print off mode how do i switch it to auto recieve mode


Hi; Receiving to Memory Temporarily You can enable memory receiving feature temporarily. Received faxes will not be printed automatically.
  1. Press [ON/OFF] to select <AUTO PRINT OFF>.
  2. ??? The fax starts receiving documents in memory.
  3. ??? To cancel, press [ON/OFF] again.
  4. ??? When <AUTO PRINT OFF> is cancelled, received faxes will be printed automatically.
good luck

Oct 15, 2010 | Canon FAX-JX200

1 Answer

My work canon jx 300 is storing faxes. Auto print


Press MENU and # - this is service mode.Find CLEAR, and OK, then select clear ALL. After that fax returns to factory sett.
You will need to reenter your settings, but it should work.

Jun 24, 2010 | Canon FAX-JX200

2 Answers

I have a Canon JX200 fax machine. There were


No, sorry, if they weren't printed they are gone. You can only hope to print out a JOURNAL to find out who sent them.

Apr 07, 2010 | Canon FAX-JX200

2 Answers

Hi my canon fax-jx200 keeps coming up recorded in memory..How do I retrieve it?? Many thanks, Lorraine


Hi Lorraine,normaly with this fax it have a auto print off setting that keep the faxes in memory.You can turn auto print to on by pressing the on/off button once less than a second,then it will switch to auto print on.
Let me know if you dont succeed.

Dec 03, 2009 | Canon FAX JX200 Fax / copier Plain Paper...

1 Answer

Our Canon JX200 fax machine will send faxes but not receive faxes


Normaly it is the auto print off setting that is set to off,press the on/off button once less than a second then it will switch to auto print on.All the faxes in memory will be printed out.

Nov 30, 2009 | Canon FAX-JX200

1 Answer

Jx200 auto print off


press the on off button once.if you press and hold the button the fax will switch off,but pressing it once it switches between auto print off and on.

Apr 09, 2009 | Canon FAX-JX200

1 Answer

Incoming fax goes to memory and display panel Auto Print Off


If you press the on /off button once the machine will switch to auto print on,if you keep the on/off button in the machine will switch on or off.

Apr 08, 2009 | Canon FAX-JX200

1 Answer

Fax jx200 memory full and i dont know how to clear


You press "Menu" button and use arrow key to select "Memory Reference" --> press "Start" button --> and now you can see your documents in memory ---> You can print out or delete. If you have any problem with Canon products you can email to me.

Apr 07, 2008 | Canon FAX-JX200

Not finding what you are looking for?
Canon FAX-JX200 Logo

452 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Fax Machines Experts

polytek

Level 3 Expert

452 Answers

old marine
old marine

Level 3 Expert

1456 Answers

john archer

Level 2 Expert

186 Answers

Are you a Canon Fax Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...