Question about Buffalo Technology AirStation G54 WHR-HP-G54 Wireless Router (DHWHRHPG54)

1 Answer

Router getting poor connection

Hi.
I have 2 Buffalo WHR-HP-G54 routers and 2 Antennex antennas at 2 locations about .48 miles apart. The 2 locations have line of sight of each other. When i first installed the system, it was working great. 1ms ping times consistent for a month. Then over night it stopped working. I put the 2 routers side by side , it worked fine , and when i pointed 1 antenna to the other , i am getting the connection. but when i put it back at the separate locations it does not work. When the routers were working perfectly, it was set to bridge and was transferring at about 3MB/s, now the ping time is not consistent. I was thinking that the router is not powering up the antenna properly, because when i used another access point (which is more powerful), it works perfectly on both locations. but when i put the antennex to antennex , the connection drops. Please help me diagnose this problem so that i can return it to the way it was intended to work.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 107 Answers

Are you trying to set up router ?
You can set up your router manually, without the CD.
Make sure that your computer is able to go online directly through the modem.
If your computer is able to go online through the modem, that means the modem is working fine.
You will need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.

Posted on May 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have this router but i want to know hoe to secure my internet connection


By default, the firewall on it should block all incoming connections from the WAN or internet network port (good thing). Make sure you do two things : 1. Change the default password on the router, and 2. secure your wireless using WPA2 for authentication and AES or TKIP for encryption. Also, rename your SSID to something that doesn't give away that fact that your router is a buffalo. I'm paranoid, so I donot broadcast my SSID...if you are too, then this is a good option.

Oct 22, 2013 | Buffalo Technology AirStation G54...

1 Answer

I have the Buffalo WHR-G125 model, i have had it for around 2 years & for the past week i have to spend ages trying to connect my laptop to it, i have switched the plug off sometimes to reboot, i have...


Hello,
I have seen a similar issue several time created by the cordless phone.

If you have your router too close to your cordless phone, you may have radio interference since both are working on a close bandwidth.

Please move one of the 2 away and tell me if you see any improvement.

regards

Mar 18, 2011 | Buffalo Technology AirStation G54...

1 Answer

I have to disconnect and reconnect my Buffalo Router each time I want to use a different system. How do I fix this problem so I don't have to do this anymore?


I think you need to reset your modem and start anew. I am going to send you to another forum to learn about your WHR-Hp_G54

See: http://www.techsupportforum.com/forums/f136/buffalo-whr-hp-g54-227877.html

Jan 08, 2011 | Buffalo Technology AirStation G54...

1 Answer

Not connecting to internet after going through steps


Please put your modem to the bridge mode and then configure your router.
For the router settings please contact your ISP

May 03, 2010 | Buffalo Technology AirStation G54...

1 Answer

Need a password to get access for my iTouch


You can check with "Admin" or no password.

if above are not work, please try to contact with your vendor.

Mar 29, 2010 | Buffalo Technology AirStation G54...

1 Answer

Adding lap top to wireless network - need network key?


If you don't remember what the key is, log on to the router and create another one. You will have to change the key on all other wireless devices on the network.

May 18, 2009 | Buffalo Technology AirStation G54...

1 Answer

Trying to connect buffalo router to comcast modem for wireless internet


You will need to use the MAC address of your PC. Do an IPConfig/all while connected with a ethernet cable. That's whatg you need to put in under Wan--> WAN MAC address

Jan 17, 2009 | Buffalo Technology AirStation G54...

Not finding what you are looking for?
Buffalo Technology AirStation G54 WHR-HP-G54 Wireless Router (DHWHRHPG54) Logo

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buffalo Technology Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Alun Cox

Level 3 Expert

2678 Answers

Are you a Buffalo Technology Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...