Question about Ovens

1 Answer

Kenmore, f2 We moved in with the stove here about 7 years ago, and it was unplugged for the last 2 years. We plugged it in today and the F2 error appears and the beeping won't stop. Please help! It's built in with a microwave on top.

Posted by on

  • ax8060 Jan 29, 2009

    was getting intermittent f2 error now oven won't come on at all.
    sensor ohms out at 1100. control panel??

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 725 Answers

I can help but I need a model number

Kenmore are made by many different manufacturers of their appliances..

F2 error is most likely a oven sensor problem . your over sensor has to low or high Ohms or you Electromic oven control thinks it has to high of an Ohm reading. replace oven sensor and or control
let me know if this helps

Posted on Jun 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Audible alarm sounded--"F2 "appeared on


Your model is actually a 911. Roper (Whirlpool)

The F2 error code is

E0 - Shorted keypad (also called touch pad)

E1 - Keypad cable unplugged

E5 - Cancel key drive line open

E6 - Cancel key drive line open

Solutions:

1. Check keypad connector for firm connection (keypad connects to control board).

2. Press CANCEL. If error code returns after 60 seconds, replace keypad (also called touch pad or membrane switch). Some models incorporate keypad in to control board as one unit. In this case, replace control board (also called ERC or clock).

Jul 30, 2011 | Ovens

1 Answer

Hello. I have a Kenmore Ultra Bake, with push button control. After wiping down the panel it went crazy. The panel is now showing EO F2 and continuously beeping. I can use the stovetop, but can't turn...


Hi

Thanks for using FixYa. Error F2-E0 on your oven means that the keypad is shorted and to resolve this issue you'll have to replace the electronic range control/clock(ERC). Please do rate the solution if the issue is resolved or post a comment for further assistance.

Thanks
Rylee

Sep 15, 2010 | Kenmore Ovens

1 Answer

Error Code F2 and F3 on Kenmore free standing stove model 71342


My Magic Chef oven keeps getting a F3 error

Dec 14, 2009 | Kenmore Ovens

1 Answer

I have a kenmore stove and it keeps flashing F2, I have unpluged it, could you please tell me what is wrong with it


is it e1 f2 or just f2. usually f2 means you have a shorted keyboard you need a new keypad.

May 28, 2009 | Kenmore Ovens

1 Answer

EO F2 on our Kenmore oven keeps coming up.


The "F2 - E0" error code means "Shorted keypad".

Remove power from the range, open the control panel and unplug the membrane switch ribbon from the control board.Reconnect power to the range and observe for an hour.If the error code reappear - replace the control board.If not - replace the membrane switch.

May 15, 2009 | Kenmore Ovens

1 Answer

EO -F2- Error?


F2-E0 - Shorted Touch Pad (Keypad) - Check the connection between the touch pad (keypad) and control board (clock) to make sure it is secure.
Select the 'cancel' function and wait 60 seconds.
If error code reappears then replace the touch pad, or touch pad and control board (clock) if all one assembly.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Oct 27, 2008 | Kenmore 40494 / 40495 / 40499 Electric...

4 Answers

F2 code and consistent beeping with my Maytag Electric Wall Oven model CWE5800 or CWE4800


The F2 code indicates a stuck relay. You will have to replace the relay board. It may be a stand alone board or it may be part of the ERC Electronic Range Control. If you know how to check you won't have to call a tech.

Dec 21, 2007 | Ovens

Not finding what you are looking for?
Ovens Logo

Related Topics:

271 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

 Fix Your Board
Fix Your Board

Level 3 Expert

310 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you an Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...