Question about HP Photosmart D5160 InkJet Printer

1 Answer

FLASHING LIGHTS AND PRINTER NOT RESPONDING

THE EXLAMATION MARK AT THE TOP OF THE PRINTER IS FLASHING AND THERE IS A LINE GOING AROUND THE SCREEN ON THE DISPLAY PANEL, THE PRINTER WILL NOT RESPOND TO ANYTHING, THANKS

Posted by on

  • 1 more comment 
  • louise139 Sep 01, 2008

    THE EXLAMATION MARK AT THE TOP OF THE PRINTER IS FLASHING AND THERE IS A LINE GOING AROUND THE SCREEN ON THE DISPLAY PANEL, THE PRINTER WILL NOT RESPOND TO ANYTHING, THANKS

  • ratzlaph Sep 03, 2008

    I just replaced the ink packs, closed the cover, and the red problem light is flashing. When a print job is initiated, job will go to print quey but will not transfer to printer. ???? - help !!

  • monty58 Sep 05, 2008

    Exclamation mark flashing.

    Picture of stacked paper on printer screen, and below that 2 teardrops.

    there is paper in the printer and there is no jammed paper. Have switched off and back on, same problem. the basic guide is no help.

×

1 Answer

Seems to have sorted its self out now i just kept turning it on and off and trying to print off test pages and things, still not 100% but works of its own accord lol

Posted on Jul 31, 2008

2 Suggested Answers

  • 1 Answer

SOURCE: THE EXLAMATION MARK AT THE TOP OF THE PRINTER IS FLASHING AND THERE IS A LINE GOING AROUND THE SCREEN ON THE DISPLAY PANEL, THE PRINTER WILL NOT RESPOND TO ANYTHING, THANKS

there is a flag switch located to the left hand side of the top cover that causes this issue
if you look at the left hand lip of the top cover, you should note that it does not meet flush with the top of the control panel, there is a cutout for the lever for the flag switch that appears to not move as smoothly as designed, my guess is a mismounted switched or a misaligned axle for the switch

you can actually access the switch lever itself when the top cover is open, just reach in and wiggle it until it depresses properly, you may have to do this (or at least check it) every time you open the top cover

Posted on Jun 21, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Not booting up when powered on. It starts like it's going to but screen goes blue then flashing hash mark at top left of screen.


PRESS ESCAPE EVERY ONE TO TWO SECONDS AFTER POWERED ON THIS SHOULD BRING YOU TO A SCREEN THAT GIVES YOU OPTIONS TO BOOT IN SAFE MODE OR GO TO A SETUP SCREEN

Apr 03, 2013 | Dell Inspiron Computers & Internet

1 Answer

Yellow trangle and exlamtion mark on dashboard


What car make and model is this please?Are you check your owners manual under instrument panel description?

Feb 15, 2012 | Fiat Grande Cars & Trucks

1 Answer

Light on dash shaped like fishing bobber with an exlamation mark inside and hash marks around it just came on. No manual to show what it represents to correct.


This is a indicator light that lets you know that one of your external bulbs are not functionng properly. Check all of your marker lights, signals and brake lights. You should find that one of the bulbs is blown.

Nov 20, 2010 | 1999 Ford Windstar

1 Answer

The red exclamation mark keeps flashing and on the left half of the printer's screen there is dashed lines that keep going around in a rectangle pattern. I turn the printer off and then the printer turns...


use the printer settings on pc to diagnose the problem through its menu possible paper jam or an ink that is done and requires replacement but do check if there is no paper jammed in the machine and that all the doors and covers are closed

Oct 18, 2010 | HP Photosmart D5160 InkJet Printer

1 Answer

Icon 'sun' with an exlamation mark


Hi, I think you may mean the low brake fluid warning light.
Hope that helps Matt...

Nov 22, 2009 | 2001 Volkswagen Passat

1 Answer

HP deskjet 5940 printer - lights flashing rapidly and not responding.


>flashing lights or a cobination of lights blinking on your printer will tell you exactly what the problem is, go to this link and see the steps on resoling the blinking lights on your printer
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00394958&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN

Oct 03, 2009 | HP Deskjet 5940 Photo InkJet Printer

2 Answers

Warning lights flashing occassionly VW Passat 01' 1.6l


with all dash lights if its red is v important, yellow just a nice to know warning, sound like a heated screen on light?

Feb 02, 2009 | 2001 Volkswagen Passat

1 Answer

Red exlamation mark flashing


Usually this either means a paper jam or an ink cartridge is empty. If it is not paper then check your ink it probably needs a new cartridge. Hope this helps.

Dec 21, 2008 | HP Office Equipment & Supplies

4 Answers

THE EXLAMATION MARK AT THE TOP OF THE PRINTER IS FLASHING AND THERE IS A LINE GOING AROUND THE SCREEN ON THE DISPLAY PANEL, THE PRINTER WILL NOT RESPOND TO ANYTHING, THANKS


there is a flag switch located to the left hand side of the top cover that causes this issue
if you look at the left hand lip of the top cover, you should note that it does not meet flush with the top of the control panel, there is a cutout for the lever for the flag switch that appears to not move as smoothly as designed, my guess is a mismounted switched or a misaligned axle for the switch

you can actually access the switch lever itself when the top cover is open, just reach in and wiggle it until it depresses properly, you may have to do this (or at least check it) every time you open the top cover

Oct 19, 2008 | HP Photosmart D5160 InkJet Printer

2 Answers

Flashing lights.. when i turn power off it just does same thing


All lights flashing indicates a "fatal error" condition, so the printer just needs to be reset:

1. Turn the HP c3180 off.
2. Unplug the power cord.
3. Wait a minute, then plug the power cord
back in.
4. Turn the HP c3180 back on.

This should clear the system error and restore the printer to its "out-of-the-box" default settings.

Feb 26, 2008 | HP Photosmart C3180 All-In-One InkJet...

Not finding what you are looking for?
HP Photosmart D5160 InkJet Printer Logo

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...