Question about Onkyo TX-SR702 Receiver

1 Answer

No sound I have a onkyo ts-sr702 when I turne it on sound don't come in till about 10 to 30 minutes. any sugestion.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,234 Answers

The unit is in protect mode until then. What needs to be determined is why it takes that long for the system to settle down. Basically, there are circuits built in to prevent faults from causing damage to external devices like speakers. These circuits prevent the output section from turning on until all of these voltages are correct. If you recall from a long time ago, it was common for the speakers to produce a loud pop when the receiver was first turned on. These circuits prevent that (as one example).

This unit should be brought to a service shop as it will require signal tracing to determine the faulty component. This is not likely to be diagnosed remotely through a forum like this.

Good luck and keep us posted.
Dan

Posted on Jun 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can i buy one of these


start with onkoyo site for retailers in your area or order from site

Jul 07, 2014 | Onkyo Mic 4000 Omnidirectional Calibration...

1 Answer

My TX-SR702 receiver often displays a 'Dialog


Need to know your source and exactly how that source is connected to the receiver. Also need to know what surround sound mode you are using and whether the program material that drops out is compatible with that decoding format. Might be as simple as changing surround modes when this happens, but you should know that many cable boxes and some disc players routinely drop their digital audio signals from time to time and can give you these symptoms. Best remedy is to call Onkyo tech support with all of your information requested above documented in one place. They can help you troubleshoot while you are in front of your receiver.
For Product Support Team Only:
1-800-229-1687
Hours:
M-F 9am-8pm | Sat-Sun 10am-4pm ET

Jul 24, 2010 | Onkyo TX-SR702 Receiver

1 Answer

Onkyo tx-sr702 sound cuts out when pausing, then starting a recording on DVR or changing HDTV channel


That would be a function of your Cable/DVR dropping its digital bitstream output, wouldn't it?

My Pioneer does the same thing when I switch channels on my cable box or ANY sources. The receiver has to resync with the new bitstream, buffer it, figure it out and sort out the audio channels. Sounds like normal operation to me.

Apr 01, 2010 | Onkyo TX-SR702 Receiver

1 Answer

Onkyo TX-SR702 remote problem


So what you're saying is you think the receiver is broken because the remote won't turn it on.

Try fresh batteries or another remote that can be programmed for the Onkyo and get back to us.

Apr 12, 2009 | Onkyo TX-SR702 Receiver

1 Answer

Switched outlets on Onkyo 702 are always on.


Zone 2 has to be turned OFF for the switched outlets to turn off in stanby mode.

Nov 23, 2008 | Onkyo TX-SR702 Receiver

1 Answer

Onkyo TX SR 702 AV Receiver


don't run you video from the projector to the reciever. just run it to the dvd and run the sound from the dvd through the reciever

Jun 01, 2008 | Onkyo TX-SR702 Receiver

1 Answer

Onkyo TX-SR702 keeps going into speaker setup mode


Los amplificadores de audio del aparato estan a punto de danarse,checa las bocinas una por una a ver si no hay alguna mala.

Apr 14, 2008 | Onkyo TX-SR602 Receiver

Not finding what you are looking for?
Onkyo TX-SR702 Receiver Logo

Related Topics:

308 people viewed this question

Ask a Question

Usually answered in minutes!

Top Onkyo Audio Players & Recorders Experts

Dennis McCollum

Level 2 Expert

137 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

Are you an Onkyo Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...