Question about Brother MFC 210C All-In-One InkJet Printer

1 Answer

MACHINE ERROR DF - cant find how to fix this...

How can i fix this pls help me....

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

Machine error46, whats this?

Posted on Jun 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error code e000225-0001 for canon I r 3035 what I do pls. help me


Hi,
The light intensity of the CIS is faulty.
During DF stream reading, the sheet-to-sheet light intensity is faulty.
Disconnect and then connect the flexible cable. Replace the following as necessary: flexible cable, CIS, reader controller PCB. Canon iR3035 Error Codes List page 3 from 16

Aug 15, 2016 | Canon iR3035 Copier

1 Answer

Toshiba E-studio 166 error code c26


hi. i have problem in my Toshiba e studio 166. that machine toner light is blinking always. i try so many time nd i fixed new toner also. but i cant get any result of this. pls help me to solve this problem....

Mar 07, 2012 | Toshiba e-Studio163 Copier

12 Answers

Cannon ir 3530 all error code and solution


Code Error name/description

E000 fixing overheating

E001 fixing assembly overheating

E002 fixing assembly low temperature

E003 post-standby fixing low temperature

E007 fixing film rotation error

E010 main motor rotation error

E014 fixing motor rotation error

E019 waste toner case full, waste toner case full sensor error

E020 toner clogging between sub hopper and developing assembly

E024 developing assembly connector disconnection

E025 hopper motor, bottle motor error

E032 NE controller counter error

E064 power supply voltage error (high-voltage)

E100 BD interval error

E110 scanner motor error

E191 communication error for high voltage power supply

E202 CIS home position detection error

E225 CIS light intensity error

E227 reader unit power supply error

E248 backup memory error

E261 zero-cross signal error

E315 image data error
E400 feeder communication error

Mar 03, 2011 | Canon ImageRUNNER 3570 Copier/Printer

4 Answers

Konica 7022 (code F-26-1) Pls call service 0870-2425050)


i have a konica 7022 it say call service code F-35-3, what's wrong with it, help me.

Mar 21, 2009 | Toshiba 2060 Copier

1 Answer

NP 6545 Copier - Error Code E401


error code E401...DF paper feed motor lock...check the motor of your DF...try to turn off the machine and unplug the communication cable from DF to the machine and turn on the machine again...

Mar 16, 2009 | Canon NP 6545 Copier

1 Answer

I have a machine error


Does your machine have a ADF ( document feeder) on it? IF it does check the connection between the ADF and the machine. Also check the connection between the scanner PWB and the DF drive PWB. These are the 2 boards that let the machine communicate with the ADF. If your machine does not have an ADF, check to make sure that the side covers are closed securely.

Jan 05, 2009 | Kyocera KM-1510 Copier

2 Answers

Canon pc980 dF error


Page 62 of PS980 manual shows how to get rid of the dF error, and it worked for me just now. If you can't see any paper causing a jam, there could be a small piece of paper above the white feeding belt. 1) turn off copier, lift lid, and gently pull the feeding belt. If nothing falls out and you still get the error, 2) insert a postcard to the left of the feeding belt and wiggle vertically and horizontally. To my surprise, a small piece of paper I had copied and forgotten about emerged on top of the copier lid!

May 08, 2008 | Canon PC-980 Color Copier

1 Answer

Brother DCP8020D Document Feeder


Clean rubber rollers with metho, run a page by hand of laminate or stiff card threw the doc feeder. Stick it where the paper comes out of DF and ensure path is clear.

Push down on left side or tape down little black switch (rear left corner near glass)while trying to use df to confirm hinge aint the issue

If it is the rollers it should feed when paper is "helped a little" with hand at feed time

Ensure prints ok when using glass instead of df to know it is df problem

Cheers

Apr 28, 2008 | Brother DCP-8020D All-In-One Laser Printer

1 Answer

Df-3035 copier


Hello flyersgirl68,
I truly wish I could help you. But , you would not believe how helpful it would be if I knew what brand copier you have. Canon makes a 3035 copier but they have no error codes that start with f. Mita "MADE" a copier (1986) that had an "f" in their error codes that indicated the feeder had a problem. I guess we might want to narrow it down a tad. Is your machine a ...........canon,olivetti,mita,ricoh,savin,oce,kodak,xerox,minolta,konica,nashua,pitney bose,danka,savin,gestetner,monroe,ibm,imagistic,panasonic,toshiba,lanier,brother,riso,......etc....

Apr 18, 2008 | Printers & Copiers

2 Answers

Message d'erreur sur la Kyocera


Make sure document feeder cable screws are tight and if cable guard (metal bracket) is not installed make sure it is not too close to the wall.

Mar 27, 2008 | Kyocera CS-2550 Black and White Copier

Not finding what you are looking for?
Brother MFC 210C All-In-One InkJet Printer Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Printers & Copiers Experts

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Rick Johnson
Rick Johnson

Level 2 Expert

84 Answers

John mullen

Level 2 Expert

245 Answers

Are you a Brother Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...