Question about Belkin PC Desktops
If you can log into router it will let you change in there if not little hole that resets router on back press in hold power up router (keep button in) wait for 30 seconds (keep button in)and let go this should reset to default which possible on base of router or notes it came with
Posted on Jun 06, 2008
Tips for a great answer:
Jan 06, 2014 | PC Desktops
It is usually easiest to run the install wizard, but be sure to be ready to set the items listed below.
Things to set:
Note: Routers are intended to be set by geeks. You have to SAVE EVERY page, or the changes will be lost. A geek knows this (apparently). The router gives no protest...just dumps your changes.
1. Login password (RECORD THIS!!). Consider taping to bottom of the router. Physical access is not the security issue.
2. Set a recognizable system ID.
3. Invoke wireless security of at least WEP.
a. Assign your own access code, 10 digit home or cell #. Consider taping to bottom of the router. Physical access is not the security issue.
4. Check that your router is set to broadcast its' presence.
Oct 23, 2010 | PC Desktops
Oct 10, 2010 | PC Desktops
Jan 16, 2009 | PC Desktops
Sep 13, 2008 | Belkin PC Desktops
Sep 09, 2008 | Belkin PC Desktops
Jul 20, 2008 | Belkin PC Desktops
Jul 17, 2008 | Belkin PC Desktops
Jul 07, 2008 | Belkin PC Desktops
38 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: