Asa 5505 firewall problem

Please check the upgrading the software in the below link
LINK

1. Please check your printer's IP address and port number is permited in your cisco firwall or not.

This should tell you everything you need to know - http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080940e04.shtml
Hope I helped Dr Reed

Use the Cisco ASDM or SDM software, that will give you an easy graphical interface to configure the ASA. One of them would have been shipped with the device.

Don't forget the ASA has to pre-configured, just a simple config. Have HTTPS enabled and telnet/SSH helps as well if you dont have a serial port or the console cable.

Cisco's website will give you quite a lot of info for free...

De ce nu pot Dwnloada???

1. Change your PCs default gateway to your firewalls' internal IP

2. configure the nameservers on your ASA

Then internet will work fine.

Hi, the Cisco ASA 5505 is the base model, and URL filtering is not available on this model. The first model that allows URL filtering is the 5510, and every model above that. You can view the models and features here:

http://www.cisco.com/en/US/products/ps6120/prod_models_comparison.html

A conflict in the IP address, resolve it

Check for an IP conflict. How are you assigning the IP address on the workstations? If one of them happened to have the same ip address as the ip on the vlan1 on the ASA for example, you would have that exact issue.

Let me know how things go.

take this site address u will get all the commands of firewall

http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/asa80cfg.pdf