Question about Maxent MX-42XM11 Television

2 Answers

Maxent MX-42XM11 Television Power Problem Problem

Hello, I have Maxent MX-42XM11, it was this morning but now it wont turn on, I hear couple of clicks in the back of the tv, as it is attempting to power on but nothing happens, the tv wont turn on. Any solutions?

Posted by on

  • 2 more comments 
  • jdberry63 Jul 30, 2008

    Iam a technician working on one og these units, and thid set does have thev 190v and 60v to the sustain bds (no blown fuses on sustains) and still have no display. Front panel green light stays on. Unfortunately no service lit. I am guessing main control bd., display logic bd or panel. Any ideas?

  • isaacsilva Nov 11, 2008

    Same problem here.. Swaped the main board, nothing happened, then swapped the auxiliary board, nothing happened either. Just lost money and time..

  • zeus613 Nov 18, 2008

    I have almost same problem only I have 180v when I lift f2. reinstall fuse and set will start to start relay will click and go to shut down. something is loading this 180v line. Third tech to look into this. I'm a tech with no manual and don't know where to go from here. With back off looking up from bottom the board i believe has a problem is the larger board on R. Any hisatory on this.

  • tooncrzy47 Dec 31, 2008

    how do you fix this problem and with what part thanx

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

I was having the same problem and the power supply board was out

Posted on Feb 19, 2009

  • tooncrzy47 Feb 19, 2009

    the power supply board was out

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 868 Answers

Sounds as if your high voltage is out.Very sorry! You can have a TV tech . verify if needed to be 100% sure.
Please rate this ! Thanx!!

Posted on Jun 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have red dots on the screen


If the problem is same with different input devices and you have ensured the are no loose contacts in power outlet, RC jack, cable and sockets, the TV needs servicing.

Aug 16, 2012 | Maxent MX-42XM11 Television

1 Answer

I am hearing a loud hum from the back of my tv. It seems to be louder when there is more white on the tv. When there darker colors on the tv it becomes less loud. Is this a bad thing or is just a function...


Very bad - that hum comes from the power source that is close to death and it's no longer capable of handling the extra power required by a brightly lit screen with ease. Stop the tv open it's back cover and look on the power source for aged components - especially failing capacitor.

Sep 05, 2010 | Maxent MX-42XM11 Television

1 Answer

Maxent doesn't show up as a TV with my TiVo. What do you suggest?


If you can not find Regent / Maxent in the manufactures list, try the code search features. Here a URL to the TiVo support site, there you can find all the information needed to get started. http://support.tivo.com/app/answers/detail/a_id/292/kw/codes/r_id/100041

May 05, 2010 | Maxent MX-42XM11 Television

1 Answer

Maxent 42 inch Plasma TV MX-42XM11 model # P420142X1 showing a blue screen with "No Signal" when I plug in a dvd player with the RCA cables. I do notice the letter "S" appears next to the "No Signal" when...


hit the back panel. I have the same ty and it's the only interface to the inside ..no coaxial cable , no hdmi or nothing ...this was made out of pure stupidity!

Apr 06, 2010 | Maxent MX-42XM11 Television

2 Answers

The at&t remote will not control the on and


check the remote control.

Take the remote control nearer to your portable radio. Tune to the MW range 550 kHz to 1600kHz. Lower end prefered.

Press the keys you will hear a sound. Press on/off and see whether you get this sound. If no sound you have check the remote pcb or the key board mat.

Mar 29, 2010 | Maxent MX-42XM11 Television

1 Answer

My maxent 42 inches remote control is not working, the light is on,I follow the instructions to reset it but nothing


It,s either one of the buttons is stuck or open it and clean it with some spirit not only that have it resoldered

Feb 25, 2010 | Maxent MX-42XM11 Television

1 Answer

My maxent tv looks like I am watching tv with antenna and not dish


make sure you have a hd receiver and use hd wires to either "hdmi" or red, blue, green wires to connect it to your tv

Aug 28, 2009 | Maxent MX-42XM11 Television

1 Answer

No power up


The YSUS Board Was Bad

Dec 31, 2008 | Maxent MX-42XM11 Television

1 Answer

Maxent MX-42XM11 Plasma HDTV


finding correct tv code for mexent 42 inch plasma tv for direct tv receiver

Dec 31, 2007 | Maxent MX-42XM11 Television

Not finding what you are looking for?
Flat Panel Televisions Logo

Related Topics:

758 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maxent Flat Panel Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68172 Answers

Cindy Wells

Level 3 Expert

4753 Answers

Are you a Maxent Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...