Question about Polycom SoundStation Premier EX Audio Conference

1 Answer

Flash timing setting for polycom sound station

Dear Sir,

We purchased one polycom sound station 4 years ago.Now we want to do the 3 party conference but it is not happening. The equipment is behind Alcatel EPBAX and the flash timing of the EPABX is 300ms.Please advise.

Mahadev Thapa

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You need to update the flash timing on your Soundstation to match what is on your PBX.

Check out http://knowledgebase.polycom.com/kb/search.do?cmd=displayKC&docType=kc&externalId=10964&sliceId=SAL_PUBLIC_1_2&dialogID=2075496&stateId=0%200%202071605 and http://knowledgebase.polycom.com/kb/search.do?cmd=displayKC&docType=kc&externalId=11208&sliceId=SAL_PUBLIC_1_2&dialogID=2075496&stateId=0%200%202071605

Posted on May 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you conference in 2 separate #s? We tried: 1. Dial the 1st # 2. Press flash 3. Dial the 2nd # And how do you connect them on 1 call? Thank you!


This will depend upon whether your Polycom is connected to a PBX system or using a public landline. If using the Polycom through a PBX you may need to consult the system admin as you will often need to enter a 'conference code' before you dial the second party ie.

1. Dial the first party and ask them to hold
2. Press the Flash key
3. Dial the conference code for your system ie. #46
4. Dial the next party and ask them to hold
5. Press the Flash key twice and all parties are joined.

If you are using a public landline (ie. home phone line) then you will be limited to the conference services that your phone company provide and these are usually also accessed via a code. There are also conferencing services that for a fee you can dial into and follow the prompts to austomatically arrange your conference call.


May 17, 2011 | Polycom VoiceStation 300 Conference Phone

1 Answer

How to reboot soundstation 2w polycom if you forgot the password


egistering Base Station on Polycom SoundStation 2W
Hold down 1,4 and 9 until green & red lights flash. Then hold down the page on the base station.
OR
You can register the base station to the console by:
1. press menu key
2. Select Admin Setup
3. Select Registration
4. You will see "Register with Base Station" in display. Press the Register softkey.
5. You will see "Power cycle base station then press ok". Unplug base and plug back in and press OK softkey.
6. You will see "Press and hold the paging button on the base for 10 seconds"
7. You will see Registering in the display on the console and then it should go to ready mode.

Mar 05, 2010 | Polycom SoundStation 2W (2200-07800-001)...

1 Answer

How do I connect 3 phone calls on a Polycom Soundstation 2. There doesnt seem to be a hold button


It depends on what system it is installed on.

NUT, generally, with the first caller on, press flash you will get intercom tone again, dial 9 and connect to the next party. Once connected, press flash again and you should be connected to the original party.

Oct 23, 2009 | Polycom SoundStation2 Audio Conference

2 Answers

How do I conference call on a Polycom Voicestation 400?


Conference call is not a feature of the phone, but a feature of the telephone system in the company. Usually you press a sequence of keys like flash #02 to trigger this function in the phone system. If your company phone system does not offer the feature then you have to use an external conference call provider.

Jun 17, 2009 | Polycom VoiceStation 300 (220017910001)...

1 Answer

Polycom sound station 2 conference set conference problem


sounds strange, it lookslike a main board problem, considering that u have been using similar unit before.there is not much that u can do from the menu options.u will have to refer ur vendor for rpairs

Jan 15, 2009 | Polycom SoundStation 2W (2200-07800-001)...

1 Answer

Conference problem


repeat you setup for all station you want to connect to it.

Sep 18, 2008 | Polycom SoundStation

1 Answer

Adding person to a teleconference group


How can I add 3 other people on the conference call using a Polycom Soundstation?

Jan 08, 2008 | Polycom SoundStation

5 Answers

Conference call with a Polycom SoundStation EX


The conferencing capability to bridge 2 (or more) external stations comes from the telephone equipment/service that you have purchased. Either you are behind a PABX or Electronic KSU, which provides multiple phone service to your office, or you purchase conferencing capability from your local telephone provider (Verizon, AT&T, etc). In either case, the way to initiate a conference call would be the same as when you would have a desktop/office phone and establish a conference/bridged call to external parties. Usually this occurs by having one party on the line, flashing the disconnect button momentarily, getting a new dial tone, dialing and connecting to a second party, then flashing the disconnect button again, which signals the equipment to bridge those two calls to your station.  On the SoundStation EX there is a Flash button that provides that capability of momentarily flashing the disconnect button.  Try and see if that works. If not, then you will need to make arrangements to purchase the external equipment or service from your provider.  If you have the PABX or electronic KSU, it may also be a configuration option that you will need to have your support person for your telephone system, activate for that station connected to the SoundStation EX. Hope that helps. 

Oct 22, 2007 | Polycom >>> SOUNDSTATION PREMIER EX /AVAYA...

4 Answers

Base station


You can register the base station to the console by:
1. press menu key
2. Select Admin Setup
3. Select Registration
4. You will see "Register with Base Station" in display. Press the Register softkey.
5. You will see "Power cycle base station then press ok". Unplug base and plug back in and press OK softkey.
6. You will see "Press and hold the paging button on the base for 10 seconds"
7. You will see Registering in the display on the console and then it should go to ready mode.

Oct 12, 2007 | Polycom SoundStation 2W (2200-07800-001)...

1 Answer

Unkown Beeping During Calls


It is hard to tell if this conference phone is installed on a PBX or not? "At meetings" tends to make me believe that it is. Beeping can come from a few sources. If a call is being recorded it is necessary to provide a beep tone so that the parties on the line know that they are being recorded. This is a FCC requirement. You can ask the other party if they are recording the call. Beeping can come from call waiting. It is recommended to turn call waiting off unless you are bridging incoming calls. If a call is on hold you will get a beeping tone. You can check by pressing the flash button and see if there is a second call. If so hangup and your original call should return normally.

Mar 21, 2007 | Polycom SoundStation 2W (2200-07800-001)...

Not finding what you are looking for?
Polycom SoundStation Premier EX Audio Conference Logo

Related Topics:

1,510 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polycom Conference Phones Experts

Danny Nagdev

Level 2 Expert

47 Answers

pbxinc

Level 2 Expert

61 Answers

David Burbee
David Burbee

Level 2 Expert

1868 Answers

Are you a Polycom Conference Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...