Question about Intel D915GUX Motherboard
Well first about the cd/dvd. it debends on the connector, if the connector is wide with 40 pins this means its a IDE. so you would connect it with a IDE cable to a ide connector on the motherboard, and by the way there can be two devices on a IDE cable, the other has to be set to master and the other to slave.
See the small 6 pins next to the cable, there you should also see a small plastic jumper with a metal inside, you need to change this jumper so its either on slave or master, only one slave or master can be present so check the other device also.
The cd / dvd may also be a smaller SATA drive and in that case you simply need to plugit into a small exactly same type of connector on the motherboard.
about the front panel
the connector should be like this
simply attach them to the correct slots
Heres a image, note that his is not your motherboard and they might be difrent.
let me know if you need more assistance.
Posted on Jun 12, 2008
Tips for a great answer:
2,351 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: