Question about Kenmore 44102 Front Load Washer
Hey if you've got a problem, post it, I've gotten to the bottom of my problem (I hope) and might be able to suggest some things for yours.... Good luck. And yes, SEARS sucks!
I don't know how to remove the front pannel of the washer to check if anything is trapped in there. It won't take a normal screw driver is there a special tool needed?
Posted on Aug 02, 2008
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Hey friend, thank you for your post!
I understand that the start button on your Frigidaire washer continues to flash. This could be indication that the control panel has been paused or is miscommunicating. I would recommend performing a reset on your washer and you can do that by flipping the household circuit breaker off for roughly ten minutes. If you continue to receive blinking lights your control panel may need to be replaced. This however is not a simple DIY job and I would advise you to contact a professional technician for proper repairs. If you do not have a professional contact I would suggest looking over your manufacturer's website. Hopefully this helps to some degree. -Matt
Feb 12, 2015 | Frigidaire GLTF1670A Front Load Washer
Hey friend, thank you for the post!
I see you are getting an 18h code on your front load washer. Normally any error code would have the letter E or F in it. I would suggest that stands for 18 hour delay start cycle, you could do a reset on your washer by disconnecting power to it or turning off the household circuit breaker for ten minutes and turning it back on. Hope this information is helpful. -Matt
Jul 21, 2014 | Frigidaire GLTF2940ES Front Load Washer
Jan 27, 2013 | Maytag MAH2400 High Efficiency Front Load...
May 04, 2017 | LG TROMM WM2688H 4.0 cu.ft. Front Loading...
The smell usually comes
when the washer is unable to drain water completely, you can run your washer at
its hottest temperature setting with 1 cup of vinegar inside the unit. After
this take off the bottom front panel and clean it completely, also clean the
drain hose and drain pump filter, the smell should disappear after doing all
this. Hope this helps...please post back for further assistance.
Sep 12, 2011 | LG WM1814CW Front Load Washer
Jul 19, 2011 | Frigidaire FTF530FS Front Load Washer
Jun 29, 2011 | LG WM-2277HW Front Load Washer
May 30, 2011 | General Electric WCVH6800J Front Load...
Jan 24, 2011 | LG WM-2277HW Front Load Washer
Jul 16, 2009 | Kenmore 2.1 cu. ft. Portable Top Load...
53 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: