Question about Bravetti Kitchen Appliances - Others

2 Answers

Bravetti deep fryer model BF155

The unit recives power, but does not heat up , it was working as i was adding the oil/shorting.....please help!


Posted by on

  • stevecn10 Jun 25, 2008

    your help great , it saved me money....thanks you people are the best,,,,! and my DEEP FRYER is working...

    Thank`s again




2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The unit recives power, but does not heat up , it was working as i was adding the oil/shorting.....please help! Regards Claude

Posted on Nov 25, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has answered 200 questions.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 254 Answers

This sounds like you have a high limit switch that has tripped. Look on the unit for something that looks like a red button about 1/8" in dia. You may have to remove the cover if the button is not present this unit may have a snap type disc high limit, it be a flat disc around the dia. of a quarter with a small disc on top of it. you can usually remove these by taking off the two attachment screws. There will be a temp range on the disc ring this is what you will need to size a replacement.

Hope this helps you.

Posted on Jun 14, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My Breville BDF450 will not turn on (no lights no nothing). Heated oil up prior to cleaning. Cleaned and changed oil now unit will not work at all

Did you pour out the oil when it was still at it's hottest temp? I would guess there is a master overheat sensor that tripped off. It will be a little thermodisc with 2 power wires connected to it. Find and replace that thermostat sensor. You can test it for continutiy with a volt meter.

Dec 11, 2014 | Breville Deep Fryer BDF450

1 Answer

I have a frymaster sr14esd, it turns on and makes noise but does not heat up. Is it my thermostat?

If the unit seems to be powering up and making noise, then you have power and it doesn't sound like a tripped breaker. About the only noise I would expect would be the element heating up and maybe the oil popping unless there is a fan. What kind of noise is it making? IF you have the equipment & know how, you could confirm power to the heating element or check the load the item is placing on the electrical service. One way to check the thermostat is you can turn the Tstat all the way down, turn on the power and see if you can hear the power engage as you slowly bring the temp setting up.

Nov 29, 2014 | Frymaster Dean 2424G Deep Fryer

1 Answer

Valentine Pension 1-83. The fryer heats the oil and then the switch on electric board trips? Please help

Hi there!
Check the rating of the electrical circuit breaker where the unit is tapped, it must be at least 25 % higher than the unit' s current rating on nameplate to avoid tripping.
If hi-limit of the unit trips after reaching temperature setting, try lowering the set point; hi-limits are designed to trip off at 450F for safety. Or it may be faulty causing premature or early trip off temperature.

Apr 03, 2014 | Imperial IFS40 Deep Fryer

1 Answer

Deep fryer pilot is blown out when burners go out after reaching temp

Hi there. Hi limit may be tripping off due to high oil temperature (power supplying the gas valve is connected in series with the hi limit). Verify if the thermostat is not shorted, also please check the thermostat calibration if it is good.

Sep 16, 2013 | Frymaster Dean Kitchen Appliances - Others

1 Answer

The gas come through when the oil is cold, but when the oil hat enough the gas will cut off completely even without the pilot light, i wander why this happen? please let me know!

Hi there.
The hi limit may be tripping prematurely or the thermostat has its contacts stuck heating the oil temp high enough to trip the hi limit.
Kindly check those two components.

Sep 07, 2013 | Imperial IFS40 Deep Fryer

1 Answer

Imperial 40 ignites but does not extend flames into heating tubes. Burns only fron

It sounds like your gas line either is clogged or your heating tubes are clogged up with oil/dirt/gunk? You can blow these out with a small hand held compressor or if you have a small enough brush, you can use that to clean it. The compressor is the quickest way, but have you cleaned this unit at all? Using a fryer boil out and running the fryer will also help clean out your holes, but again, the compressor works best.

Nov 21, 2011 | Imperial IFS40 Deep Fryer

1 Answer

My fryer went nuts, it was on and working fine, the beeper went off and I went to check on my food and the unit was off. I unplugged it and plugged it in 4-5 times and nothing, tried it again in the...


Thermal safety switches are-common in heating type appliances. If this unit is so protected, a reset should be somewhere on the unit. Another component is a fusible link. This is basically a enclosed fuse that that will blow if a short or excessive current draw is present for an unusual length of time. The reset will kick everything back to normal instantly. The fusible link is generally inside the unit on the power in wire. This link should be replaced with its like. It will require soldering on replacement. This fryer is probably an expensive unit , so the cost of replacement opposed to repair should be weighed. Good Luck to you. Thanks for seeking your answers through Fix-ya. _Ned_

Apr 04, 2011 | Euro-Pro Kitchen Appliances - Others

1 Answer

I need a replacement handle for a deep fryer basket for bravetti model f1063b is where you can find parts for Bravetti deep fryers.
They have lids, baskets, handles, heating elements and so on.

Jul 04, 2009 | Bravetti Kitchen Appliances - Others

Not finding what you are looking for?
Kitchen Appliances - Others Logo

Related Topics:

399 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bravetti Kitchen Appliances - Others Experts


Level 3 Expert

4332 Answers

sonic boom...
sonic boom...

Level 3 Expert

1557 Answers

ray gallant

Level 3 Expert

37587 Answers

Are you a Bravetti Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides