Question about LeapFrog FLY Fusion Pentop Computer

1 Answer

Fly fusion I have recently purchased a fly fusion for my daughter and we installed on my computer at work which has WIndows XP. It installed fine. We then tried to install at home on our Windows Vista and it starts installing and then about half way through a screen comes up that says NEXT, we press NEXT and the screen disappears and nothing else comes up. Does Fly Fusion not work with Vista. It said on package that it did.

Posted by on

  • thefinster Jan 02, 2009

    same exact problem

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I just had this same problem, and the Fly Fusion website has this to offer (the website link is http://fly.custhelp.com/cgi-bin/fly.cfg/php/enduser/std_adp.php?p_faqid=1619&p_created=1201901554&p_sid=fj7lBboj&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPSZwX3NvcnRfYnk9JnBfZ3JpZHNvcnQ9JnBfcm93X2NudD04NSw4NSZwX3Byb2RzPSZwX2NhdHM9JnBfcHY9JnBfY3Y9JnBfc2VhcmNoX3R5cGU9YW5zd2Vycy5zZWFyY2hfbmwmcF9wYWdlPTE*&p_li=&p_topview=1 or you can go to Fly Fusion supprot link and click on the FAQ section to access this information):

Question Unable to install FLY World on Vista fly fusion - trnsp.gif Answer If you are unable to install FLY World on the Vista operating system, please follow these instructions.

1. In windows explorer navigate to c:\windows\system32

2. Find the application named "cmd". Now right click on "cmd" and select "Run as Administrator"

3. In the following window, type or copy and paste

regsvr32 /u vbscript.dll

Now press enter. You may receive a pop-up regarding DllUnregisterServer that it succeeded or failed. In either case, click OK.

4. Next type or copy and paste

regsvr32 /u jscript.dll

Now press enter. You may receive the same pop-ups regarding the DllUnregisterServer message. Click OK once more.

5. We will next need to type or copy and paste

regsvr32 vbscript.dll

and press enter. You may once again receive the pop-up window. Simply click OK to continue.

6. Finally, type or copy and paste

regsvr32 jscript.dll

and press enter. You may once again receive the pop-up window. Simply click OK to continue.

7. Try running the installer again.

Posted on Jan 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install graphic card my computer\nr


Try to plug the graphic card in daughter card slot of mother board Then start your system, if you are using windows xp, Vista and windows 7 Then may be possible that it will automatically install the driver other wise you can insert the graphick card installation disk in cd/dvd drive and install the driver then reboot the system and it will work fine.

Mar 19, 2010 | Intel XFX GeForce2 MX400 (64 MB) Graphic...

1 Answer

My FLY Fusion Pentop Computer won't turn on, but when it is connected to the computer the light turns red


Try leaving it hooked up to the computer for a while then after maybe a few hours try to turn it on again.

Jan 25, 2010 | LeapFrog FLY Fusion Pentop Computer

1 Answer

Where is the documentation? (Place to start for many questions on the Fly Fusion Pentop Computer)


I posted the link for documentation responding rather than answer a dozen other posts with related requests.

I'm fine with giving answers for people, but do I have to pay FixYa after 30 days for the privilege of doing so?

Best, Mark

Jan 08, 2010 | LeapFrog FLY Fusion Pentop Computer

1 Answer

Added memory causes machine to shut down and boot up continually.


it proves that your emacchine does not support your addition of memory try a bit lower capacity memory

Aug 22, 2009 | Computers & Internet

1 Answer

Cannot install CARD GAMES for Windows


It's probably an issue with Vista, right click on the icon, go to properties, run as administrator, and run in compatability mode for XP. If this doesn't fix the problem, try contacting the software manufacturer.

Apr 29, 2009 | Computers & Internet

3 Answers

Windows xp screen freeze


try reinstalling vmware and XP if that does not work you should get parallels

Mar 16, 2009 | Microsoft Virtual PC 7 with Windows XP...

1 Answer

We have lost the book that tells us how to work the fly pen can you help


If you go to the LeapFrog Website and at the bottom select customer support you can then select the fly fusion.  The guide you are looking for is entitled "Fly Fusion Parent Guide" I know it's not named the way it should as it is a general guide and not just about account administration.
http://www.leapfrog.com/etc/medialib/leapfrog/fly/ffls_37735.Par.40053.File.dat//Users/na/Desktop/Parent%20Guides/FFLS_37735_PG.pdf

Jan 12, 2009 | LeapFrog FLY Fusion Pentop Computer

1 Answer

Windows doesn's recognize camera, device manager says no driver


Hi -

Have you tried another USB port? Sometimes, they can act goofy.
Also be sure your anti-virus isn't blocking any part of the installation.

Here is a link to the Samsung troubleshooting guide for your camera.
You can probably download the most recent driver from that website as well.
Perhaps they have a better or newer version than what came prepackaged
with the camera (just because a camera is a new purchase does not mean
the software it came with is the most updated).
http://tinyurl.com/5zsvwd

I run WinXP home edition, so I am not familiar if there are any differences in the professional version regarding software installation....

Good luck!

Dec 17, 2008 | Samsung L100 Digital Camera

1 Answer

Kodak easyshare 5300 aio printer


i CANT OPEN MY AIO HOME CENTER WITHOUT GETTING AN ERROR THAT SAYS ENCOUNTERED A PROBLEM, HAS TO CLOSE. ALSO, MY PICTURES ARE NOT VIBRANT COLORS.

Jul 21, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

MacBook


If you purchase a program called Boot Camp, VMWare Fusion, or Parallels you can load both XP and OSX to run dually or separate.

May 22, 2008 | Apple MacBook 13"White /2.0Ghz Intel Core2...

Not finding what you are looking for?
LeapFrog FLY Fusion Pentop Computer Logo

Related Topics:

559 people viewed this question

Ask a Question

Usually answered in minutes!

Top LeapFrog Toys Experts

Iron
Iron

Level 3 Expert

3018 Answers

Kjetil Balstad

Level 2 Expert

35 Answers

GI Consulting

Level 1 Expert

73 Answers

Are you a LeapFrog Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...