Question about Linksys : WRT54GX4 Wireless-G w/SRX400 Broadband Router (NELIWP11)

1 Answer

Linksys Router Installation Model Number WRT54GX4 with SRX

Hello,
I am attempting to install a linksys router model number WTR54GX4 with SRX. I am connecting the router to a digital broadband modem supplied by mediacom cable. I want the installtion to be wireless as well as hard wire network on 2 of the ports of the router. I am not at all sure of the proper configuration for this router. Do I select DCHP because I am connected to cable? If so, once I select that the next thing is the password which I am just reentering admin, is that correct if I do not wish to change the password? Then I am naming the router in the SSID. After all of this I save to file the necessary login data. Once the installation is complete I can not get connected to the internet via wireless, however I can hook up to port number one on the router and I can access the net. PLEASE HELP ME

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 298 Answers

Booba,
With your question about the internet type you are right to set it to DHCP. And For the password you are also right. Now for the ssid that will be the name that your router will be broadcasting. If you can get your computer online through port no.1 on the router that only means that the router is already configured properly for internet connection. Now since the wireless is not working its possible that its not connected yet to the wireless network that you have set up where you were running the setup cd. Do you know how to view the available networks on your wireless computer? If you kindly provide me with the operating system of your computer that will go wireless on your network and also the model no. or the brand of the wireless adapter on it.

Posted on Jun 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Only one device can access the wireless router.


I have the same one try IE 192.168.1.1
that's the home page for linksys

Jan 30, 2012 | Linksys Wireless-G Broadband Router

1 Answer

How can i find my pin number?


Upon installation(with your cable company) the customer service agent will most likely have you generate your own... Something easy to remember; Example: someone else's date of birth, etc...

Everything else, serial number, model number, pertaining to the unit itself should be included in the package.

You should also be sent a confirmation E-mail from either Linksys or the cable company which will entail all of the information, if not the PIN number at least a secret question type of link to get your PIN.
And another for registration of the product...
At least that's how it went when I installed my wireless router ( different model)
through Comcast.

Dec 02, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

HI, I LOST MY CD DRIVER FOR INSTALLATION MY LINKSYS PLISSS HELP ME


Hello glorynetmari, You can get the drivers for your router at the following link: Just click the downloads tab on the bottom left hand of the page and choose your revision. (The revision number is usually located right after the model number on a sticker on your router.) Post a reply with any further questions or please rate this solution if it was helpful. Thanks! Edward

Aug 22, 2010 | Linksys Wireless-G WRT54GS Router...

1 Answer

No cd for linskys router


What is the model number in the back of the router?. Go to linksys.com, under the tab support linksys type the model number and that will guide to the right drivers for the operating system that you have

May 17, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

Linksys WRT54GX4 - SRX 400 Router Internet Connectivity Issues


I had a similar issue a while back and found that sometimes modems are finicky with the MTU settings. I had to throttle mine down about 20 points to get it to stay connected. Check with your provider. Their Tech Support should be able to tell you if there is an alternate MTU setting at work here.

Cheers,
Ron

Feb 21, 2010 | Linksys Wireless-G WRT54G Router

4 Answers

Need lynksys installation cd, do you know where I can find it?


You download the software needed to configure your Linksys wireless router from Linksys website.

If you have version 7.2 click below
http://downloads.linksysbycisco.com/downloads/WRT54G-v7.2_Setup_Wizard,0.zip

If you have version 7.0 click below
http://downloads.linksysbycisco.com/downloads/WRT54Gv7-EU_v7_00_4,0.zip

Take your pick.

Sep 22, 2009 | Linksys Wireless-G WRT54GS Router...

3 Answers

How to get manual linksys router


Are you trying to set up the router ?
If you are trying to set up the router then you don't need the CD or manual . you can do it manually also.
If you want manual then you can visit the linksys web site.
www.linksys.com/support

If you want to install it without any CD or manual then Click here for step by step solution

Sep 21, 2009 | Computers & Internet

1 Answer

Linksys 2.4 model # WRT54GS


Since you're trying to setup the router using the setup CD and it wont finish the installation of it, you can just do a manual setup on the router by accessing its setup page , but if you're not aware on how to do that I suggest you call Linksys tech support so a tech can walk you through with that process, this is the number for Linksys 800-3267114 they are open 24/7.............

Oct 27, 2008 | Linksys Wireless-G WRT54G Router

1 Answer

Linksys Wireless G Router (WRT54G2 V1)


Go to linksys.com. Go to support. Type in your router model number. The software will appear on the screen for you to download.

Aug 05, 2008 | Linksys Wireless-G WRT54G Router

Not finding what you are looking for?
Computers & Internet Logo

315 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

mark

Level 2 Expert

105 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...