Question about QVS NetStar (UPS650A) UPS System

2 Answers

How to charge UPS

I am having
Numeric UPS Digital 600 Plus..How to charge it...
To push ON/OFF button to ON in the UPS...? (OR) We simply plug in the UPS wire in to current board..?

Posted by on

  • Anonymous Mar 21, 2009

    how 2 charge ups

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Iam having numeric digital 600-ex-c ups but it making sound when we on the ups .... how i can charge it?

Posted on Jun 20, 2012

I own a Numeric Digital 600 Plus UPS and it only charges when plugged in and switched on.

Hope it helps

Posted on Jun 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW I CAN CHARGE THE NUMERIC UPS DIGITAL600EX


Please double check if your battery is still in good condition, as for online ups you need to have a good battery to turn it on so that you can charge your battery, if not, you need to replace your ups battery.

Oct 01, 2014 | UPS Battery Backup Systems

1 Answer

The UPS in this office is out of order, message that appear on screen is 'UPS V OUT LIMITS' and 'Battery critical'


follow this steps and fix it. God bless you
Plug the battery backup into a working electrical outlet. If the battery backup turns on when the power button is pressed, then the problem may be that the previous electrical outlet is faulty. Proceed to step three. If the battery backup doesn't turn on, proceed to step two.
  • 2 Reset the circuit breaker on the battery backup. APC battery backups have a labeled circuit breaker button located on the unit near the phone line, fax line, USB, network and coaxial cable inputs. Press the button to reset the circuit breaker. Power on the battery backup by pressing the power button. If the battery backup powers on, proceed to step three. If the battery backup doesn't turn on, proceed to step six.

  • Read more: http://www.ehow.com/how_7266444_troubleshoot-apc-battery-backup.html#ixzz2lwOvPO75
  • 3 Determine if the battery backup is charged and providing battery power. With the battery backup on and plugged into a working electrical outlet, plug a computer monitor into one of the battery backup outlets labeled "battery backup plus surge protection" on the battery backup. (APC power supplies have some outlets that provide only surge protection while the other outlets provide surge protection plus battery backup.) Turn the monitor on. Unplug the battery backup power cord from the wall outlet. If the monitor remains on, the battery is holding a charge, supplying electrical power and the battery backup is working properly. If the monitor goes off, proceed to step four.
  • 4 Charge the battery. Plug the battery backup into an electrical outlet and allow the battery to charge for 16 hours. This will fully charge the battery.
  • 5 Test battery charge. Once the battery is fully charged, repeat step three. If the monitor stays on when power is interrupted to the battery backup, the issue is solved and the problem resulted from an incompletely charged battery. If the monitor turns off when power is interrupted, the battery within the battery backup is faulty and needs to be replaced.
  • 6 Replace the battery backup unit. The unit itself is faulty. If the battery backup is under warranty, contact APC to request a replacement.
  • Nov 28, 2013 | MGE NOVA AVR 1100VA Tower UPS 81111 UPS...

    1 Answer

    How do you connect 200897 battery, it is no longer working


    I just bought a battery (readily available) for $16 and here is how I replaced it, but first, make sure UPS is disconnected from 120 Volt service. (Old battery number SW1233 with F connectors.)

    Turn the UPS over and look for 1 tiny screw (even with the "in" telephone wire socket). Remove the screw (turn CCW). Push the button marked push, then slip a steak knife or sharp putty knife into the joint in front of the screw hole. Twist the tool enough to start the battery cover moving backward (to your left).

    The battery is upside down. Lift it high enough to grab wires and pull them off the postst.

    Verify battery you bought fits the housing. With UPS upside down, place battery on right side with lugs toward the power cable. Push red wire onto red post. Hold the battery upside over UPS. Push black wire onto black post.

    Visually ensure the wires both run in their channels (otherwise the battery will not seat and the cover won't slide on.) Push battery into slot until it bottoms.

    When the battery is bottomed properly, hold the cover about 2/3's over the battery housing, push it down, then push it toward the screw hole (to your right). If this operation, or the cover jams near the screw hole, check the battery. It must be absolutely bottomed in the slot. The cover won't go on easily even when everything is perfectly aligned.

    After the cover is closed and the screw replaced, plug the UPS into a wall socket. The on/off button has a mind of its own, so ignore it. The green light may light and there is one beep. The backup yellow light may blink. The green light may stay solidly on. Pull the cord plug out of the wall. Now the UPS green light may go out and you will hear a ratcheting sound (the UPS is making AC from the 12 Volt battery current). Because you have no device plugged into a "battery-backup" plug, the UPS will shut off automatically in a few minutes.

    The last test is to reconnect the plug to the wall service, then plug a monitor, a music system, or something similar into a Battery B/U connector. The green light should light. When the UPS is again unplugged, the yellow light (Backup) flashes and there is a repeating beep. Plug UPS back in. Only the green light will be on. That's it, all done.

    I use Newpoint UPS to back up my telephone/modem. During a brownout, SPS powers those units almost 2 hours.

    Note: This UPS is not suitable for powering or charging Laptops because the power output is too dirty.

    R Hicks

    Oct 22, 2013 | Newpoint (200897) (DHN200897) UPS System

    1 Answer

    My numeric 600 plus ups swithched off automatiocally when power goes off not a single second back up its provided


    Did it work before?

    If so, then it has developed a fault. Check the battery fault light on the UPS panel. Perhaps it's battery is dead, or batery charging circuitry is faulty. Anyway, it would most probably need professional attention by a serviceperson.

    If it did not, double check whether you have connected the computer etc. to the proper sockets - many UPS devices have a couple of UPS-powered sockets plus additional sockets with surge protection only (no UPS power!) for high power devices like laser printers etc.

    Please come back and leave a rating/testimonial if helped or post a comment for further assistance.
    Thank you for using FixYa, the community-based help site :)

    Jul 30, 2011 | QVS NetStar (UPS650A) UPS System

    1 Answer

    Batteries ate not charging.


    First suspect the battery. As I guide I have split the task into the following steps.

    1. Get a voltmeter and test the battery. It should report 12.4 or 12.6 volts. Branded batteries frequently incorporate a battery status indicator in the form of a watch glass at the top. The color change indicates the battery condition.

    2. Now connect the battery with the UPS leads securely and plug into AC mains (with electricty). Test the battery terminals for voltage. If voltage is between 13 to 14.5 volts then the charger is OK. If not then check if the fuse with the DC charger is blown. With the battery disconnected check voltage between leads. It should be zero (if it showed zero volts with battery connected). If not then the charger is faulty. Also if it shows 13 - 14.5 volts with battery connected and disconnected then it is OK.

    3. Re-check for any blown internal fuses.

    Aug 11, 2009 | QVS NetStar (UPS650A) UPS System

    1 Answer

    The ups is shutting down immediatly ,once the AC power is off


    thats a dead UPS... battery is bad now... you probably need to have it changed...

    Jul 09, 2009 | QVS NetStar (UPS650A) UPS System

    2 Answers

    Numeric ups with fault indication


    Please Change Battery or Check the PCB Masfecter

    Oct 14, 2008 | QVS NetStar (UPS650A) UPS System

    Not finding what you are looking for?
    QVS NetStar (UPS650A) UPS System Logo

    Related Topics:

    4,084 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top QVS UPS Battery Backup Systems Experts

    Jax Planet
    Jax Planet

    Level 2 Expert

    921 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17129 Answers

    Cindy Wells

    Level 3 Expert

    4758 Answers

    Are you a QVS UPS Battery Backup System Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...