1. Leave it without battery for 24 hours 2. Follow this procedure: a. open the card door and set the camera to "P" mode b. switch on the camera c. the "card cover open" screen will appear d. immediately press both the OK and the monitor button (below) and keep them pressed for a few seconds until the "Camera/SDK setup" appears e. Now you can reset the camera by choosing "Camera" and navigating through. --
my camera is panasonic tz5 and my memory card is 8gb but when i turn it on i get parameter error....
(More)
my camera is panasonic tz5 and my memory card is 8gb but when i turn it on i get parameter error. what should i do?
Drop my camera and now the oicture does not show up and there is a big black space all that goes up...
(More)
Drop my camera and now the oicture does not show up and there is a big black space all that goes up and down