Question about Projection Televisions

3 Answers

Have a haier plasma tv model#42hp25bat. sound but no picture. can it be repaired?

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,035 Answers

You can try a hard reset: Unplug TV from AC mains and remove all cables from TV. Wait about 30 minutes and replug to AC power and redo the cabling. Switch on the TV and see if it works.. if this fails then its hardware problem you need to service tv .....

Posted on Sep 29, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 208 Answers

Hi,

The television could have failed for any number of reasons.
The pixelsdon't all suddenly fail when they wear out. Instead, you see a gradualdeterioration of the image, as enough individual pixels fail to affectthe appearance. Colour shifts are also experienced.

Your failure is more likely to have been caused by a problem in the power supply to the plasma screen. When there is a total failure of that nature, it usually means theproblem lies in some part of the uit that supplies power to thesubassembly or controls it in some fashion. A picture tube could loose its seal, causing a total failure, but a plasma screen hasa seal for each plasma element. This makes a total failure unlikely,unless the entire screen has come apart.

It can be repaired.
If you are still under the warranty period, you are lucky.
Contact Haeir service centre.
www.haier.com/index.htm

Hope my info solves your problem,
Thanx for using fixya,
Cheers

Posted on Sep 29, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 555 Answers

Did this occur suddenly, or was the picture gradually failing over time?

Posted on Jun 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

5 Answers

NO PICTURE BUT SOUND ,42 HAIER TV


You need an upgrade kit part: TV-3940-01.. But the part is backordered for three months. $150.00

Oct 16, 2008 | Projection Televisions

1 Answer

I HAVE SOUND BUT NO PICTURE?


Might need a new bulb. I have that problem with my haier plasma tv. I cant find a bulb for mine.

Oct 17, 2010 | Toshiba 50H81 50" Rear Projection...

1 Answer

TOSHIBA TV NO PICTURE


Sounds like blown invertor board that powers the backlights (if it is LCD or PLASMA). If your lucky and its just the invertor board blown it could cost anywhere between £50-£150 for new board (without labour).. if you are UN-Lucky, then the backlights themselfs may have blown which is *usually* an un-economic repair.

Apr 05, 2010 | Toshiba 46H83 46" Rear Projection...

1 Answer

No picture


Common faults that give you no picture and sound on Plasma are often related to Sustain board, buffer and cables problem.

In this case the cost will be affordable, ans surely worth.

In the unlikely eventuality that instead you have a faulty plasma screen , or a faulty digital control board (main board), the cost of repair may be high.

The only way to find out is by having the TV inspected by a technician.

The most common fault that gives you no picture and sound on plasma is Sustain board , lower buffer, or connector, that is repairable.

Jan 05, 2009 | Projection Televisions

1 Answer

42" haier plasma with sound and black screen!


Usually you have to be a certified technician of the manufacturer to order and receive those parts. It comes down to insurance reasons because if you were to install them yourself and the TV burned the house down and you were to perish, the company would be liable. As frustrating as it is, you will likely not get the parts. Are you saying that Haier will not provide a service technician for an out of warranty repair or at least point you in the right direction? That's poor customer service and I would think twice about purchasing from them again.

Oct 16, 2008 | Projection Televisions

1 Answer

HELLO AM TOMMY BERRY FROM CLEVELAND HTS OHIO, I HAVE A 42 INCH HAIER PLASMA TV, THAT I BROUGHT 11 MONTHS AGO , IT WAS WORKING PERFECTLY UNTIL THIS EVENING WHEN I WAS CHANGING CHANNELS AND THE TV WENT BLANK...


Since you still have sound, you haven't accidentally switched the TV to a different source, so I would say that something has failed inside. If you have had it less than a year, place a service request and maybe they'll come over and ifx it before football season gets going

Sep 06, 2008 | Projection Televisions

1 Answer

Toshiba 42 inch plasma tv


sound no picture. well not entirely bad this idicate your signal getting through and you have partial power. however this could mean that the actuall panel is faulty. if so new set time. What is the model and make of set.

Jan 17, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...