Question about Kenmore 62602 Electric Dryer

1 Answer

Kenmore 68731 dryer

How do we get the belt off?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

You have to take the top off and remove the drum by lifing it out..the new belt will come with instuctions and a new pulley tightener /tensioner with it. make sure to clean out all the lint and check the seals while you are at it..

Posted on Jun 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore 68731 model 86873100 setting the drying to any of the drying methods, the dial does not move to automatically turn off the dryer.


You have a bad timer motor To verify you will get an ohm meter and remove the wires to the motor.
11_22_2011_3_24_20_am.jpg
Check between the motor wires fer continuity. If you have continuity then the next test will verify if the gears are stripped on the motor. Apply power to the timer motor and see if it advances on its own. From looking at your model number I see nothing unusual about the timer.
to get to the[parts list I did 110.36873100. 110 is a the large prefix which ID's the dryer as being a whirlpool model. All kenmores ain't Whirlpool.

Aug 26, 2011 | Kenmore 659 Electric Dryer

1 Answer

My kenmore electric dryer turns on and heats but the drum doesn't turn?


that would be a broken belt, or the motor, I say belt. You will need to open the top of the dryer and look in the middle of the drum for a belt, which is not there I am sure, here are some websites,Tim:

how to change belt:

http://www.ehow.com/how_4814455_change-kenmore-dryer-belt.html


belt routing Kenmore is same as Whirlpool:

http://forum.appliancepartspros.com/dryer-repair/25860-dryer-belt-diagrams.htm

May 23, 2011 | Kenmore Dryers

1 Answer

Kenmore dryer,, looking for adiagram for the belt on a kenmore dryer


Below are the belt diagrams for Kenmore dryers.

jahn27_201.jpg
Figure 1. Whirlpool-made Kenmore dryers with removable back panel, filter on top, and model numbers starting with 110 or C110.

jahn27_202.jpg
Figure 2. Whirlpool-made Kenmore dryers with non-removable back panel, filter below the door, and model numbers starting with 110 or C110.

jahn27_203.jpg
Figure 3. Frigidaire-made Kenmore dryers (model numbers starting with 417).

Mar 01, 2011 | Kenmore Dryers

1 Answer

Kenmore Belt Tensioner


At the link you will find the belt configuration for your machine and others.

Dryer belt configuration

Oct 04, 2009 | Kenmore 73952 Gas Dryer

1 Answer

Kenmore Electric Dryer 68731


If still heating, clean out vent and check for kinks. Also, REMOVE PLUG FIRST!! Remove back and remove four screw holding filter duct assembly at bottom left. Pull duct toward rear and reach into bottom of duct and remove lint. Also, wash out filter screen.

Nov 17, 2007 | Kenmore 659 Electric Dryer

1 Answer

Kenmore Electric Dryer Model 68731


does the dryer have a gray back panel if it does then take it off the fuse may be bad its a small 1 in in diamiter white with 2 wires going to it replace it if the dryer has a front bottom panel in front then it is in there fuse is bad that is your problem

Aug 18, 2007 | Kenmore 659 Electric Dryer

Not finding what you are looking for?
Kenmore 62602 Electric Dryer Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...