Question about Onkyo TX-8410 Receiver

2 Answers

TX 8410 Onkyo no sound

I had this hooked up fine in my house and brought it to the ofcie and cannot get any sound out of it. I checked all of the usual things, tried CD (hooked to an Onkyo CD player), tried AM radio...nothing. ANy ideas apreciated

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Well, I'm sure you've either fixed the issue or gotten rid of the unit by now, but anyway... perhaps the speaker selection was accidentally switched (A or B), or my personal favorite: "Tape 2 Monitor" was turned on. Even if you select something else, you'll still see "Tape 2 Monitor" displayed on the LED display. Hit the button again and it will go away and your sound should return.

Posted on May 27, 2010

  • Ben Russell
    Ben Russell Apr 09, 2012

    I thought I blew some kind of internal fuse or something. This tuner system has been sitting on my desk untouched for at least 6 months. The problem: "Tape 2 Monitor" was turned on. Thank you so much!!!!

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Onkyo Master
  • 1,550 Answers

The audio amplifiers IC's are damaged.

Posted on Jun 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Onkyo TX-SR701 getting sound but not picture from Video 4


you should check the video mapping in the setup of the receiver. video 4 may be associated with hdmi or composite video instead of component.

Feb 21, 2014 | Onkyo Audio & Video Receivers

1 Answer

Hook up TV


you can use aux input.

Jun 13, 2013 | Onkyo TX-8410 Receiver

1 Answer

Onkyo TX-8410, speaker selector B not operating. When I have the speaker selector on A&B or just B, the B speakers do not operate. If I switch the wires from the same speakers to the A channel, the...


Register and download the manual for free at retrevo.com

http://www.retrevo.com/support/Onkyo-TX-8410-Receivers-manual/id/365ci162/t/2/

Individual speaker leads are not fused. It's possible the switch is defective. Does it light the speaker B indicator? If not, I'd suspect the switch.

If it DOES light the Speaker B indicator maybe there's an open circuit going to the Speaker B terminals. Or its common ground for that speaker pair alone is open.

May 17, 2011 | Onkyo TX-8410 Receiver

2 Answers

My Onkyo TX-SR502 suddenly no sound output. Why?


Same issue on a friend's receiver. I have checked and no signals from preamp pcb to main amp board, which is idling just fine, all channels. The day he brought in we checked it and it played just fine. I then took apart the faceplate to clean the display window and after that had it working for a day and a half while working on other stuff. He comes back a month later to pick up and now nothing. I have decided this is not going to go any further and just thought I'd share my findings. I think it's time we all move on.

Feb 22, 2010 | Onkyo TX-SR502 Receiver

1 Answer

Connect an amp to a Onkyo tx-904


tou may want to hook this to speaker select switch

Aug 28, 2009 | Onkyo TX-SR705 Receiver

1 Answer

How do I connect my outside speakers to play?


The onkyo should still have a speaker A/B selector in the menu.
Check on the back panel for speaker A/B.
If it has or you decide to use Zone 2 you will need to set the sound programme to "stereo" so the rears and centre do not work.
You can still use a digital source.
You should be able to display the amp's menu on the screen.
Hook up "monitor out" (Yellow) via RCA connector to one of the "A/V inputs" (yellow) on the tv, this will show you a display of the menu and will make it eaiser to navigate.

Jun 16, 2009 | Onkyo TX-SR705 Receiver

1 Answer

Tuner Omits No Sound - Onkyo TX-SR605 7.1 Channels Receiver


Make sure your receiver is hooked up to proper AM and FM antennae. Try switching to AM, scan stations. If you hear AM static and/or weak signals the problem could be antennas are not hooked up. FM has AFT which blocks out weak or noisey stations and you wont hear anything without ant.

May 06, 2008 | Onkyo TX-SR605 Receiver

1 Answer

Onkyo receiver question


One of the speaker maybe are in bad conditions and that burn out the audio amplifier IC you need to change it or send the device to a repair center.Good luck

Apr 28, 2008 | Onkyo TX-SR502 Receiver

1 Answer

Hooking up ps3


Check system in TV Format Setup:
NTSC or PAL N

Dec 28, 2007 | Onkyo TX-SR803 Receiver

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

288 people viewed this question

Ask a Question

Usually answered in minutes!

Top Onkyo Audio & Video Receivers Experts

D. E. Hev

Level 3 Expert

1059 Answers

gbob59

Level 3 Expert

2963 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1042 Answers

Are you an Onkyo Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...