Please give explanation & soulation hp laser jet 3055 scanner error 6 \r\nWhy this problem are create in our printer

Yes you can print, fax & scan with HP Laser jet All-in-one through LAN port (wired or wireless). Un-install and re-Install driver and Check "Extended Capabilities" when prompted.

You have to install the scan/print driver for the scanner to work. Also if you download the full software package you will get scanning software for the PC. Here's a link to the drivers, software and utilities for HP laser jet 3055 http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1140780&prodTypeId=18972&prodSeriesId=1161389&swLang=8&taskId=135&swEnvOID=228#1140

Please refer to this post
http://www.fixya.com/support/t6483898-please_give_explanation_amp_soulation

Generally, Error 6 is a failure of one of the PCA boards and the unit requires service.

PRINTER ERROR The laser scanner speed is incorrect. X description: 1 = Scanner startup error 2 = Scanner rotation error 1. Press GO. The page containing the error will automatically be reprinted. 2. Turn the printer off and then on. 3. Reseat cables to the laser/ scanner and engine controller. 4. Replace the laser/scanner.

Remove the top cover. The laser / unit is a black box.

Try www.partsurfer.hp.com
to purchase one.

switch off the printer, then remove all cables connecting to the printer but just the power cable.
-then press and hold the *(start/symble) and 5 button togather and turn on the printer.
-continue holding the button till you see "perment storage init" displayed and releas the button.
-then at a given point of time the printer will ask you to change laguage,time,date etc.
if this does not sort the issue service is required.

firstly restart the printer and put the blue wire into the red pocket vice versa it should work

Contact HP tech support for a replacement bulb (or a quote on one).

When powered on printer 3055 it gives error on control panel that
"Scanner error 6 Trun off and then on "
after several restart printer gives the same error
what will be the problem