Question about Samsung CLP-510 Laser Printer

1 Answer

Samsung CLP 510 laser printer

How do you reset the imaging unit?

Posted by on

  • Anonymous Feb 15, 2009

    message says to install imaging unit , what should i do?

  • Anonymous Feb 18, 2009

    same

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Try this:
There is a hidden maintenance menu in the machine!!!
You can enter the menu in this way:

Start up the machine with push in the buttons "online" and "cancel"
--You will see the message "Download mode press online key"
Press about 15 times the "menu" key
--You will see the message "Uncheck consumable mode"
Press about 15 times "menu" and 5 times "enter"
--You will see "Press access key"
Press a few enters
Press 3 times "cancel"
Go to the EDC mode
-- you will see "press access key"
Press "cancel"
Go to maintenance and initialize the parts you like to reset.

Nice isn't it?
(sometimes you have to try a few times; don't wait to long in between the steps)

Posted on Feb 26, 2009

2 Suggested Answers

respect137
  • 157 Answers

SOURCE: Why does the Samsung clp-510 color laser printer

Well one thing you should do is when your printing something out before you print make sue that you have selected color not black and white because most printers have a default setting to use black and white. Also make sure that you have color ink available to print.

Posted on Apr 09, 2009

  • 304 Answers

SOURCE: SIR HOW TO RESET TRANSFER

You can check the level of each item.
1. In ready mode press the Menu button on the control panel everal times until you see 'Setup 'on the bottom line
of the display.
2 Press the Enter button to access the menu.
3 Press the scroll button until 'Maintenance ' displays on the bottom line.
4 Press the Enter button
5 When 'Check Others ' displays on the bottom line,,press the Enter button .
6 Press the scroll button until the item you want to check displays on the bottom line.
7 Press the Enter button The display shows the percentage of item.
8. Press the scroll button display either 'Image Count' or 'Reset'
9a. Choose 'Reset' and press enter to reset the counter after replacing a consumable item
or
9b Choose Image count to display the counter.
10. Press the Upper Level button to return to step 7 and select a different choice or press it a second time to return to step
6 and choose a different item.
11. To return to the Ready condition press the Upper Level button several times until 'Ready' appears in the display.

Posted on Aug 23, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Installation driver required


HI There,

Please folow the below link to download the latest installation software and the drivers for Samsung CLP-510 Laser Printer. ( You can even download the user manuals and installation manual from here )

Link :
http://www.samsung.com/in/function/search/espsearchResult.do?keywords=CLP-510+Laser+Printer&input_keyword=CLP-510+Laser+Printer

Enjoy Installing the printer software and drivers and happy printing !!!!

Oct 23, 2010 | Samsung CLP-510 Laser Printer

1 Answer

Samsung clp 510 model, paper keeping jamming please advice


where does the paper jam. in the drum unit or fuser unit. be specific so i can solve your problem

Oct 01, 2010 | Samsung CLP-510 Laser Printer

1 Answer

Samsung CLP 510 just replaced transfer belts, imaging unit and fuser but now am getting what looks like wet spots on the prints


Hello,

Some toner may have spilled in the printer. If so, you will need to clean it out. Also, the toner cartridge may be defective and letting too much toner out at one time, the solution is to replace the toner cartridge.

Take care.


Jul 20, 2010 | Samsung CLP-510 Laser Printer

1 Answer

Why does the Samsung clp-510 color laser printer keeps defaulting to black and white print out when printing color images?


Well one thing you should do is when your printing something out before you print make sue that you have selected color not black and white because most printers have a default setting to use black and white. Also make sure that you have color ink available to print.

Apr 09, 2009 | Samsung CLP-510 Laser Printer

1 Answer

Samsung CLP 510 Imaging Unit


The Imaging unit needs to be replaced when the drum fills up with waste toner. That's what triggers the message.

Feb 02, 2009 | Samsung CLP-510 Laser Printer

2 Answers

Wrong clp 510 toner


samsung clp 500 toner cartridge can not use samsung clp 510
bcase clp 500 is without chip and clp 510 chip base cartridge so never u can user.

Dec 27, 2008 | Samsung CLP-510 Laser Printer

1 Answer

Samsung clp-510 blotchy print-out


Some types of paper can contaminate the image drum, suggest you clean it.

Dec 01, 2008 | Samsung CLP-510 Laser Printer

1 Answer

Samsung clp-510


may be the drum of your laser cartridge must be end of its life orwaste toner collection unit must be full.

Aug 07, 2008 | Samsung CLP-510 Laser Printer

1 Answer

Toner and Imaging Unit issues


If this IS a CLP-510, first make an information confirmation print.
Press MENU, then press ENTER, and ENTER again.

Look at the counter for the imaging unit, is it a low count confirming that you have indeed replaced it ?
If not you will need to reset the counter.

Check the counters for the toner cartridges, and check the capacity of the cartridge. On a CLP-510 the image counter for the toner is held on the chip on the cartridge (which also identifies the capacity of the cartridge).

There have been some faulty (oiginal Samsung chips), and of course re-manufactured cartridge chips could fail (many re-manufacturers don' test their cartridges before dispatch, they don't have the facility to do so without starting the count on the chip (or 'bowing' the reset fuse on a CLP-500 cartridge). VERY few re-manufacturers can test these cartridges without starting the count.

Sometimes the 'replace xxxxx toner' messages are caused by toner on the three contacts on the side of the cartridge, or their mating contacts inside the printer. Rarely, this can be caused by a faulty circuit board.

Dec 20, 2007 | Samsung CLP-510 Laser Printer

2 Answers

Resetting the imaging unit


How do you reset the imaging unit?

Dec 19, 2007 | Samsung CLP-510 Laser Printer

Not finding what you are looking for?
Samsung CLP-510 Laser Printer Logo

1,493 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Printers & Copiers Experts

Whit
Whit

Level 1 Expert

185 Answers

HEMANT GROVER

Level 2 Expert

166 Answers

CheckitRight
CheckitRight

Level 3 Expert

1352 Answers

Are you a Samsung Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...