I just bought a brand new Htc p3300 handset everything seems to work fine til this hour but my memory card (1GB) cannot be detected wat could be the problem i tried installing it for several times but it does'nt show i use the memory card supplied by the vendor in the pack
The holder design is faulty. keep the memory card in a way that the golden bars on the card are in contact with the phones shiny points one way is the lever the slot gap with a screw driver. carefully then insert the card again put a piece of paper in the back slip in the battery and the back cover should work.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
HTC sucks or atleast HTC P3300 sucks.... i am having that phone and its giving lot of problem... about sd card.... it had withme also i it was not working in my phone but in othere it was working fine but anyways i changed to new sd card and that stupid phone was able to detect that new card....
The default setting for the viewty camera is set as the handset. changing the primary storage setting to external memory does not change this.`Switch the camera on as if you were going to take a picture. Click on the cog wheel in the bottom left hand corner. click on the memory card icon (second to last icon on the left.) Top right will show memory in use. Select external memory and click the save icon below. follow the same process for the video camera. Pics and vids shoild now be saved on your memory card. If you take the memory card out you will have this process again.
It sounds like your not able to access the internet on the device , try going to a normal webpage and then you can check if it loads it most probably wont. if that is the case you will need to contact your network to get the settings. ( Most networks will brand the device with there own name it can be helpful to find what this is before calling .) once you have done this then you will be able to download the quick gps settings . The special GPRS mentioned above is only the networks name for there GPRS service.
After this is done you may notice that you still arent able to use your GPS to find your location that is because you need to select the port that the GPS device is on
1.Tap start > settings
2. Tap the system tab
3. Select the GPS option
4. In the drop-down box that is entitled GPS program port select COM4
5. Tap Hardware tab , Gps hardware port should be ( None ) and baud rate 4800
6. Tap access tab and then select manage GPS automatically tickbox
7. Now click ok then x
You will now need to setup MAPKing to use COM port 4 as the GPS device this will now allow you to use your GPS properly