Question about Mitsubishi WS-55411 55" Rear Projection Television

2 Answers

Mitsubishi turns on for 3 seconds then shuts off..after power surge

I have a WS-55411, during a thunderstorm tonight and power surge the TV turned off. When we try to turn back on, we hear a flick the green light comes on about 2 seconds then it shuts itself off. No flashing green light though. Please help..with suggestions

Posted by on

  • Ed Baker Aug 21, 2008

    I have the same problem, but a storm did not cause it. I have check the fuse and it is ok.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

2-2-2-2-2 what does this code mean?

Posted on Nov 19, 2014

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 8,617 Answers

Try holding in the menu and input buttons together on the front panel for about 8 seconds to see if the self diagnosis feature will blink a two digt code then let me know what happens

Posted on Jun 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WS-55411 What seven capacitors need replacing? 2-3 code Problem


U check the power supply board,check all cap,and replaced it?Ur tv make buzzing noise when u turn on power?Ur flyback is dead.

Mar 17, 2010 | Mitsubishi WS-55411 55" Rear Projection...

1 Answer

TV wont turn on, the power light turns green for a second then blinks three times and turns off?


That blinking light represents an error code,give Mitsubishi a call they will help you troubleshoot and diagnose your problem and if needed help you set up service. 1-800-332-2119 Good luck !

Nov 29, 2009 | Mitsubishi WS-55411 55" Rear Projection...

1 Answer

I have a Mitsubishi projection model WS-48413 that


do you get a click if not check the fuse inside next to the ac cord inside the unit
if you do have a click then your convergance amps let go you will need a tech to replace them qbout 150 dollar job

Nov 19, 2009 | Mitsubishi WS-48413 48" Rear Projection...

1 Answer

Mitsubishi 55411 projection tv has red band across bottom


go into the customer menu and select convergence with the original remote; if either the red or blue will not move in some direction, you have a bad convergence IC(the WS-55411 uses two STK-392-110 CONVERGENCE IC chips)

Aug 12, 2009 | Projection Televisions

1 Answer

During a power surge my tv turned off and it wont turn on now at all


i have a rca television and my t.v. just cut off when i was looking at it and , when i tried to cut it back on, there was no sound and no picture and the power button did not want to cut off on it's on i had to unplug it.

May 12, 2009 | Mitsubishi WS-55805 55" Rear Projection...

1 Answer

Mitsu WS-55411 RPTV-power going on and off..won't stay on!


Hello,

It is possible that the Low Voltage power module is defective, however I would first check the High Voltage power supply for bad capacitors (they tend to go bad first). In fact check both boards for bad capacitors (they will look puffy in appearance if they are really defective).

I hope this helps,

Thank you,

Shuttle83

http://www.electron-age-technologies-llc.com

Apr 14, 2009 | Mitsubishi WS-55411 55" Rear Projection...

1 Answer

Do have power and sound, do not have picture


this unit has a self test check you can do

when the set shuts down or when the set is turend off.
press and hold , onthe front of the set the input or device button, and hold the menue button for bbout 5 seconds.
the set will flash a 2 digit blink code at you.
12 blik = no problem
21 blink = xray protect
22 blink = short protect
23 blink = loss of deflection.

regards,
daniel.

Jan 15, 2009 | Mitsubishi WS-55411 55" Rear Projection...

1 Answer

TV not turning on after left on


ok 6 hours is not long but i would deffintly say u have a power issue now with the box inside over heated and burnt out will have to be prfessionaly replaced

Jul 18, 2008 | Mitsubishi WS-55411 55" Rear Projection...

3 Answers

Tv wont power up makes a noise but no picture


Your power transformer is likely shot. It'll cost at least $200 to have it replaced. Someone can come to your house to diagnose it. Usually costs around $65.

Nov 03, 2007 | JVC AV-56WP74 56" Rear Projection...

2 Answers

Projection TV keeps shutting down


I just took my Mitsubishi WS-65315 65" in to be repaired for the same problem and was told that it needed a new main circuit board part number 930b899005 as was told they wanted to charge me $1100.00. So I told them not to do the repair and picked up my tv and found that same part at Sears parts for only $225.00. Some of these TV repair places are theifs.

May 10, 2007 | Mitsubishi WS-48315 48" Rear Projection...

Not finding what you are looking for?
Mitsubishi WS-55411 55" Rear Projection Television Logo

469 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68153 Answers

Are you a Mitsubishi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...