My Bissell PowerEase carpet cleaner will not pick up cleaning solution. I've only used it twice.

Try putting vinegar white and water 50 50 in tank and try to spray let it sit overnight try again if nothing happens the Selinoid is stuck dalways rinse these machines after use and only use bissell oxy clean

Check all pipe / tube connections one may have broke or com loose.

I'm not a big fan of Bissell products to begin with, but I can tell you from many, many years of experience that, far and away, the most common cause of problems with any of the carpet shampooer, steam cleaners, etc., is that they are stored with unused materials in the tanks and hoses. They are seldom cleaned, rinsed, or receive any type of cleaning before being put in the closet to be pulled out sometime in the future, with the very next attempt at application of the shampoo, or cleaner or whatever is still in the tank, not happening, because the hoses are plugged with a gelatin like substance. This is, in reality, what happens to many of the shampoos on the market, when they are left unattended for long periods of time. You haven't mentioned your cleaning, maintenance procedures concerning the unit, so I have no way of knowing just what may be causing your product, however, I think if I were you, and not using something more than twice a year, I think I'd look into renting a cleaning unit, rather than owning one.

If unit is not picking up solution it is most likely the small red plastic filter that is just above the small float door in the top piece just left of the tool switch.. pop it out clean muck out of it and it will work like new again...

You need to replace the pump belt. Here is the belt you need:

Bissell ProHeat Belt

Hi,

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems

heatman101
ydtyd

Hi,

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems

heatman101
m,nb

my bissell machine was bought 2nd hand and I can see where to put the water in...too complicated...anyone have the bissell proheat pro-tech with scotchgard i believe the model # is 010-5458