Question about Philips 26PW6341 26" TV

2 Answers

Philips 20GX3555/71R TV Problem

Hi there! Please help me to solve the problem of my TV. My TV has no power, i checked and found out that the 3.15A fuse blown, then i replaced it but it blown when i switch on the tv. What would i do now? Thanks...

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 291 Answers

Something is causing your TV to blow the fuse. If you don't know a lot about TV repair, then I'll give a simple guide line. With the electrical cord UN PLUGGED , look inside the TV carefully and see if anything looks burned (if something should be brown, but looks darker brown then the other brown things) could be a problem. Serious!! look and see if there is a BUG, insect laying across some electric terminal .They tend to get inside and electricute them self by walking across the terminals.Smell around & see if there is something burned.
I am afraid to give u any more guidelines unless u really know what u are doing because the TV is very dangerous, There are circuit that hold a charge that can stop your HEART if touched.

Posted on Jun 05, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 2,035 Answers

THis is the problem with the power unit in the tv you need to get it service or the replace the unit as there is short which is causing the fuse to blow............................................................

Posted on Jun 05, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

No picture only sound.

Engineers are right, you need a new LED panel., or the component that supplies the light to the screen.

Mar 18, 2016 | Philips 55pfl4706df7 4000 Series Lcd...

1 Answer

Sir, i have philips 20PT138B TV. i was watching TV at night and light suddenly was gone and when it comes the tv power led was glowing but when i tried to turn on, led begins to blink 3 times.and screen...

If you wish to get more details, check this site. Pull up older posts there. Check the site with patience, as it has over 2200 posts now. All are related to electronic equipment repair help. Blinking codes to Philips TVs are given in detail.

Apr 07, 2013 | Televison & Video

1 Answer

My Philips 42PFL5604H/12 has no power

Hi Anonymous,
Set Has no power means either the power is not reaching the set or the power supply section has gone bad. Well if you are handy with some tools please check the fuse, try replacing it with the same type if it is found blown. If the set works, enjoy watching. In case fuse blows again or you are unable to do all this, please consult some TV Tech.

Mar 11, 2012 | Philips Televison & Video

1 Answer

Hi. I have a 42PF5520D Philips 42" Plasma. Started


Your power supply board is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like, to buy a whole refurbish power supply board for the replacement.

Hope this help in solving the problem....

May 06, 2011 | Philips 42PF5520D 42 in. EDTV-Ready Plasma...

1 Answer

What amp is the power fuse for the tv listed below?

Fuse rating would be 3,15A 250V for this tv.
Hope this info will help you.

Nov 10, 2010 | Astar LTV-2701 27 in. HD-Ready LCD...

1 Answer

HI I have a Philips 37PFL5332D/37B 37: LCD TV that

lightning usually will damage the entire power
pcb and signal pcb.try power pcb first .this will probably repair the tv.

Jul 18, 2009 | Philips 37PF7320A 37 in. HD-Ready LCD...

1 Answer

Tv. does not turn on sometimes? philips 63pf9631d/37

i had same problem. i took apart my tv and found there was debris stuck between the plastic push power button and the little sensor thing it touches. having it on it would randomly turn off. i adjusted it and it was fine. but now it just pops a fuse lol. hope it helps.

Feb 15, 2009 | Philips Televison & Video

2 Answers

Actually Philips 20PF5320/01 Fault no power, blinking LED

ok you have defective power supply! from the secondary power supply! or hot side.

Oct 08, 2007 | Philips 20PF5120/01 20 in. EDTV-Ready LCD...

1 Answer

Power supply problem busted fuse

Hello, in most of the new LCD and Plasma TV-s there are special IC-s you can not find in regular stores. Only way to solve this is to contact the Philips Service and order the IC. In most cases the only available items are the complete boards. If you need more info please advice.

Apr 21, 2007 | Philips 23PF5320 23 in. HD-Ready LCD...

Not finding what you are looking for?
Philips 26PW6341 26" TV Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73150 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Jaime Hernandez

Level 3 Expert

2307 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides