How do I adjust the Mars-eye elec. finder. - Galileo FS-120DX Telescope

Does it just stop or does it stop and go back up. If it just stops you need to adjust the down switch on the motor head. Before you do that make sure nothing is in the track blocking it from going all the way down. If it stops and returns to the top you will need to set the elec. safety eyes that go across the door. You can tell if it is the elec. eyes by holding the wall switch in and it will over ride the elec. eyes and the door will go all the way down. Hope this helps.

Mine was doing the same thing. Find your Mars box, then...
Here is the link to get the manual. http://www.caralarm.com/manuals/MARS/MARS-22.pdf
See pages 20 & 21 ( see picture) With the engine running you will turn either the Smart Start or Tach Wire adjust screw, depending on which setting your box is set on. You will turn one or the other until the LED LIGHT blinks consistently.

Mine was doing the same thing. Find your Mars box, then...
Here is the link to get the manual.
http://www.caralarm.com/manuals/MARS/MARS-22.pdf

See pages 20 & 21 ( see picture) With the engine running you will turn either the Smart Start or Tach Wire adjust screw, depending on which setting your box is set on. You will turn one or the other until the LED LIGHT blinks consistently.

I had the same problem. Here is the link to get the manual.
http://www.caralarm.com/manuals/MARS/MARS-22.pdf
See page 20/21 (picture)
Find your Mars box. You will need to turn either the Smart Start adjust screw or the Tach Wire adjust screw until the LED LIGHT is blinking consistenly.

If it's a Mars--Here is the link to get the manual. http://www.caralarm.com/manuals/MARS/MARS-22.pdf
See pages 20 & 21 ( see picture) With the engine running you will turn either the Smart Start or Tach Wire adjust screw, depending on which setting your box is set on. You will turn one or the other until the LED LIGHT blinks consistently.

You cannot see because you have a reflecting telescope and when you look in and it and your sight bounces back and you cant see anything...

Garth
Under the veiwfinders eye peice is a small switch! look in veiw finder and adjust switch to focus and it will clear up for you!
Please rate this response and help us keep this area free!
Thank You!

subaru662,
can you see the lens in the finder move when you zoom out? if not ,the finder lens is stuck.
if it does move when zooming, see if you have a diopter adjustment wheel or sliding knob near the front lens of the finder. if so adjust the lens to your eye.

Use the diopter adjustment to refocus the viewfinder to your eye.

Point the camera at a sign or something with writing on and half press the shutter button to focus then move the little adjuster at the top right of the viewfinder until the image in the veiwfinder is in focus

point the telescope at some thing during the day and adjust the finder scope and at night point at a star look through the eye piece and center the object in the eye piece then adjust the finder scope.