Question about GPS Devices

1 Answer

Dont know how to set or turn off my alarm clock on my digital watch

Black and gray digital watch with date of the week displayed, water resistant, and 4 black buttons:2 on each side

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

To turn the alarm on/off, try pressing simultaneously the two buttons on the right hand side.

Posted on Mar 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2010 F150 electrical issues


The cause of this could be you need new wiring because something like a mouse from outside could have chewed on it or it was shorted out or you may even just need to replace the fuses i would suggest you check your owners manual and find the Radio,heater,clock fuses and check them. The way you check for a broke or burnt fuse is you take it out and you look at the metal on the inside if it is black and broken it is no good if it looks like there is no damage and the metal is connected then you may have a wiring issue.

https://www.youtube.com/watch?v=faWZmG0fXy8

Skip to 2:09 if you dont want to watch the whole video
How to Find and Replace Blown Fuse in Your Car or Truck

Apr 29, 2016 | Rosen DSFD1030P11 2010-2012 Ford F150...

6 Answers

GPS 38 unable to access date and time in system setup. presently shows 1 jan 05


Hi John921,

Here is the step by step procedure to set date and time of your Garmin GPS 38......
It will definitely work......

Set Local Date and Time


1) Verify the date and local time (this should be
the date and time according to the local date and
time of country/area you are in). Because the
time shows is Universal Time (UTC), you will
need to enter a time offset to display the correct
local time for your area.

2) Move the field highlight to the OFFSET field
and press Enter

3) With the arrows (←→), go to the figure which
represents the hours then with the up & down
arrows (↑↓), select the time offset for your
longitude and press .

4) Move the field highlight to the HOURS field
and change to 24 if that is not already the case.

This will definitely work......
Please rate this solution............

Thanks......

Sep 08, 2008 | Garmin GPS Devices

1 Answer

How to change time


In Map view tap anywhere near the center of the screen. A new screen is displayed. On that screen locate the Change Preferences icon, tap it. Press the right pointing arrow (may have to tap 6 or 7 times) until you find the time and Date icon. Tap it and configure. You can set the clock manually or let it synchronize itself with the GPS signal.

Dec 20, 2013 | Tomtom One XL GPS Receiver

1 Answer

I got the timex-ironman-run-trainer 1.0 gps which is water resistant up to 50 meters. when i went to my first first pool workout of cross country it broke the second it touched the water


Just because it says it is water proof does not mean it is, most watches that say they are have to be taken to a jewlar to be set with a strong housing just for the watch to do the depth.

Aug 27, 2013 | Timex GPS Devices

1 Answer

My Northstar 6100i display had water incursion. After disassembling and drying/cleaning out the unit, it worked fine for about a day. Then it started to flicker and lose lines, then went gray.


When electronics have taken water on, it must be dis-assembled within the hour and washed using rubbing alcohol to have a chance in saving the device. Once corrosion sets in and ic's are compromised it is already to late. The only option from your description is replace the unit for new one, because you can spend time and money to find it breaks down again days from now or even weeks.

Mar 07, 2011 | Northstar 6100i GPS Receiver

1 Answer

Garmin 205w alarm - wont go off!


I don't know what alarm is going off. The only reference I can find to an alarm (other than an alarm clock mention in the appendix which is incorrectly linked) is a proximity alarm for POIs or safety cameras. In any case, see if this helps you: http://www8.garmin.com/manuals/2675_OwnersManual.pdf . Let me know.

Mar 26, 2010 | Garmin nuvi 250W GPS Receiver

1 Answer

No setting instructions.


Atomic clocks are the wave of the future because of their precision. While it takes a scientist to fully understand how these clocks actually work, the general public is primarily interested in their accuracy, rather than their construction. A major benefit to atomic clocks is that they serve as the main standard for calculating time internationally. While each version of atomic clock may have minor differences, for the most part, they are set in the same way.

1. Remove the battery cover on the back of the clock using the correct screwdriver (if one is required). Be careful not to break the cover or lose any screws in the process. Insert the required number and type of batteries into the clock. Most atomic clocks take two AA batteries. Make sure the batteries are positioned with the right polarity in place, and that the clock is functioning, before replacing the battery cover. Place the cover back into its original position and screw any necessary pieces back into place to secure the cover and protect the batteries from springing free.

2. Enter the program mode of the clock by holding down the appropriate button. In most cases, the button will be clearly marked "Set." If not, refer to the clock's instructions to find out which button fulfills that function.

3. Push the button down until the clock flashes its default time zone setting of --5EST. It is now ready to program each function separately as described in the steps below. If for some reason the clock does not respond as outlined, refer to the instructions provided with it for troubleshooting guidance.

4. Press the + button to select the right time zone from the 13 international options provided. The default setting of --5EST (Eastern Time), should appear first, followed by --6 CST (Central Time), -7MST (Mountain Time), -8PST (Pacific Time), -9ALA (Alaskan Time), -10HAW (Hawaiian Time), -11, -12, GMT (Greenwich Mean Time), -1, -2, -3 and --4ATL (Atlantic Time). Then push the "Set" button down again to confirm the time-zone setting you have chosen. Push down the "Set" button again and hold until the selected time zone flashes.

5. Press the "Set" button down two more times to establish the default language setting. Press the + button down to select English, French or Spanish. Then push the "Set" button down again to confirm the language setting.

6. Push down the "Set" button again and hold it until the time zone flashes. Then press the button down three more times until the time 12:00 flashes. Press the + button down to select the hour at the time of the clock's setting. Make sure the hour is set appropriately to AM or PM. Then push the "Set" button down once more to confirm the hour setting.

7. Push the "Set" button again and hold until the time zone flashes. Then press the "Set" button four more times until 00 flashes. Press the + button down again to select the minutes at the moment of setting. Push the "Set" button once more to confirm the minute setting.

8. Push the "Set" button again and hold until the time zone flashes. Then press the "Set" button five more times until the default year flashes. Press the + button down. Toggle through the settings until the appropriate year is reached. Then press the "Set" button down to confirm the year.

9. Push the "Set" button again and hold until the time zone flashes. Then press the "Set" button six more times until the default month of January is reached. Toggle through until you reach the right month. Then press the "Set" button down to confirm the month.

10. Push the "Set" button again and hold until the time zone flashes. Then press the "Set" button seven more times until the default date of 1 is reached. Toggle through until you reach the right date. Then press the "Set" button down to confirm the date.

11. Push the "Set" button again and hold until the time zone flashes. Then press the "Set" button eight more times until the default setting of Sunday is found. Toggle through until you reach the right weekday. Then press the "Set" button down to confirm the weekday.

Hope this helps......best wishes.

Aug 28, 2009 | GPS Devices

3 Answers

Unable to set the time correctly


Try to set it again:

1/Verify the date and local time (this should be
the date and time according to the local date and
time of country/area you are in). Because the
time shows is Universal Time (UTC), you will
need to enter a time offset to display the correct
local time for your area.
2/Move the field highlight to the OFFSET field
and press Enter
3/With the arrows (←→), go to the figure which
represents the hours then with the up & down
arrows (↑↓), select the time offset for your
longitude and press .
4/Move the field highlight to the HOURS field
and change to 24 if that is not already the case.
5. Press QUIT , to return to the MENU Page, then select
Navigation Setup “NAV SETUP” with the Up & Down arrows (↑↓)
then press ENTER

Hope that helps.......

Jul 02, 2008 | GPS Devices

3 Answers

How to change time in Tomtom GPS device


Here's the solution to your problem:
> Tap the "Change preferences" icon
> Tap the Arrow Icon until you reach the screen with the "Set Clock" Icon
> Tap how you would like the time displayed
> Tap done
> Set the correct time to display
> Tap Done

This will set the new time on your unit.

Mar 13, 2008 | Tomtom ONE GPS Receiver

2 Answers

Radar screen shows "no scanner". Would like resistance data for cable pin-out from display to scanner head.


Hello Clifford,

This is an old message. Are you still having trouble with this or has it been resolved?

Aug 22, 2007 | Raymarine C80 GPS Receiver

Not finding what you are looking for?
GPS Devices Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top GPS Devices Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

k24674

Level 3 Expert

7987 Answers

The Knight
The Knight

Level 3 Expert

68157 Answers

Are you a GPS Device Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...