Question about Toshiba SD-P1600 Portable DVD Player

1 Answer

"Open" written on screen

I put the disc in and it reads (Open) as if the lid is not shut. It doesn't spin or read the disc and the buttons display a "cant work" circle when pressed. It thinks the lid is up.

Posted by on

  • Anonymous Dec 23, 2008

    my plastic piece is still there... i think the button may be missing... help???

  • dougmeece Jan 09, 2009

    I have the same problem. The plastic pin is on the disc door but on the board there appears to be no button. It looks like it come down on top of a black piece of plastic that is soldered to the board but there is not button on it that I can see. I assume it would be small?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 50 Answers

There is supposed to be a little plastic piece that pushes down a button that tels it that it that the door is closed that plastic piece is broken off. Look for it and glue a little piece of plastic on it, should fix it.

Posted on Jun 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony cdp-c215 wont read disc removed cover disc doesn't spin


The pladder motor that spins the disc is open, or the laser pickup is defective, the whole laser assembly would need to be replaced, not cost effective to repair cheaper to buy.

Apr 16, 2012 | Sony 5-Disc CD Changer with SA-CD Playback

1 Answer

After ejecting a disc and putting in another the tv screen displayed an error occurred and we cannot get the power button to shut off to reset it


Do you have any details on what the error was? If it was a 001 read error, or something related, where you often get a green or blue screen, you simply need to FIRST eject the disc by pressing the eject button, then hold the power button down for about 5 seconds and your Wii will shut down.

Jan 31, 2010 | Nintendo Wii Console

2 Answers

Faulty goodmans 1104s dab player


In the lid should be a mgnetic plate that holds the disc to the motor spindle (much like slight pressure would). Inspect it to make sure it's free moving and seating all the way when the lid is closed. I had one unit where the spindle on the motor shaft had slid down slightly causing the magnetic plate to not seat down all the way. Also, if the magnetic plate is removable, try placing it on the disc with the lid open and bypassed and see what happens.

Hope that helps...

Geno

Mar 06, 2008 | Televison & Video

1 Answer

Not recognizing DVD player


i would say for some reason your dvd player is not compatible from now on with that brand of blank dvd!


get the firmware update from the brand website all you do is download the file burnit on a cd and put it in the dvd player should fix most and eventual problems

Jan 14, 2008 | Panasonic DMR-EH75VS DVD Recorder/VCR/HDD...

1 Answer

Tascam Mixwell - CD-DJ1


on putting in the cd and shutting the lid an error occurs. on the screen it reads' remain err sled' and the cd is not spinning. what is the problem???

Dec 29, 2007 | Audio Players & Recorders

3 Answers

Disk won't spin


My sons playstation 2 went to browser and after reading the only one solution of putting a cup on top of it, we did try that but we found that the problem was the silver piece had moved, so after we moved the silver piece toward the middle toward where the disk goes, then closed it, and put a little pressure on top and you could feel it turning , then we opened it back up, the silver part had moved back again, but the playstation started back working then without any pressure.. so my suggestion is move the silver part close to where the disk goes.and it will move itself back....It sure worked for us..I was beginning to think money down the drain for this playstation 2....thank God it worked so maybe it will work for you...

Dec 27, 2007 | Sony PlayStation 2 Slimline Console

1 Answer

Open message when closed/disc wont spin


I figured it out, it was the little plastic sensor stick that tells the unit that the lid is closed therefore reading the disc. cheap piece of plastic that has surely snapped on many a unit. good luck replacing it. i rigged it though problem solved

Sep 16, 2007 | Necvox RE-8169D 8 All-In-One Motorized...

1 Answer

Toshiba sd-p1400 dvd player not detecting discs


i think the motor is bad since its nt spining u can change the motor

Aug 13, 2007 | Toshiba SD-P1400 Portable DVD Player

Not finding what you are looking for?
Toshiba SD-P1600 Portable DVD Player Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71611 Answers

Jaime Hernandez

Level 3 Expert

2292 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...