Question about Pioneer Projection Televisions

3 Answers

Pioneer Pro Elite HD 1000 TV No picture or sound. Red light flashes 3 times.

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,037 Answers

The power supply is probably going out due to a short on the board, this can be very expensive if you have a technician fix it. So have a look at it and let me know what you find. If you have any further or other questions, please let me know as I am more than happy to help.

good luck

Posted on Jun 04, 2008

  • Benjamin Patri
    Benjamin Patri Jun 08, 2008

    If you are satisfied with your experience here, then feel free to provide me with some feedback by
    rating my solution. If you need any more help, I would be glad to
    assist you, just ask.





    Thanks for your time and service and I hope you have a Great Day!

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pioneer Master
  • 13,433 Answers

This may be a problem with the powerboard, have you checked the fuse(s)?

Posted on Jun 04, 2008

  • Ekse Jun 04, 2008

    do you have experience and knowledge in electronics its not safe to open the tv if you have no idea what you are doing.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,587 Answers

Unplug it for 20 min..try it again then

Posted on Jun 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi My name is Dieter and I have a Pioneer Elite Pro-610-hd which keeps loosing the picture and sound.


The tv "LAMP" LED light indication front of the screen panel flashes?When was the last time u replaced the tv projection lamp on this tv?If the last time u replaced the projection lamp was like 1/12 or 2 years ago?The tv been on and used like 4 or 5 hours a day?The tv projection lamp life are over.Require a new projection lamp.

Sep 19, 2010 | Pioneer PRO-610 58" Rear Projection...

2 Answers

Pioneer Elite Pro-118 rear projection tv


ya mine did something close to the same. at the moment i covered the blue canon inside the tv now the picture isnt 2 of eveything. the tv comes apart easy from the front good luck mike

May 02, 2010 | Pioneer PRO-200 60" Rear Projection...

1 Answer

Elite pro 610-hd, shuts off after only about 10-15min of play, light snap and done.


sounds like you have in intermittent short at one of the picture tubes. Probably a small hole in the bell housing of one of the picture tubes that arcs to ground once the high voltage reaches a certain level, then arcs to ground & shuts the TV off. Not cheap to repair. Probably will cost about $500

Apr 04, 2010 | Pioneer PRO-610 58" Rear Projection...

1 Answer

Pioneer Elite Pro 620 HD TV on several occasions the screen has gone black but sound continues and the power green libht remains on. After shutting down for 10-15 minutes picture comes back.


Pioneer Elite Pro rear projection 620HD - Picture is still there but brightness and "white" have faded over years allowing for mediocre viewing when room is dark only. During the daylight picture is visible if viewed straight on and within 15 feet from set. Any suggestions?

Oct 16, 2009 | Projection Televisions

1 Answer

Pioneer elite pro-530hd tv---no picture at all!


I have a 532nd 53 that shuts off and red stand by lite comes on in the back. If you wait awhile and unplug it and plug it back in it will come on again and then shut off after an hour or two

Jan 19, 2009 | Pioneer PRO-530HD 53" Rear Projection...

1 Answer

Problem with pioneer elite pro-99


We are having the same problem of the Pioneer Elite Pro-99 turning itself off all of a sudden. The red 'non' power button comes on as if we had turned it off remotely.
We would love to resolve this. If you can help let us know.

Jun 30, 2008 | Pioneer PRO-99 TV

14 Answers

Sony tv repair


I own a Sony T.V. model #KV36HS510, Serial # 9024184,Event# E36002407 and it"s aTrinitron brand name. Like the problems before no picture or sound, stand by light on front of unit flashes. When trying to turn it back on you can hear the power click, like it wants to turn on, but does not.

Dec 22, 2007 | Projection Televisions

2 Answers

Pioneer PRO-510HD Elite


since your tv is 6yrs old it could be that the video circuit has cold solder that needs to be resolder if that does not work then a focus on the video circuit by replacing the component there, it could be an ic or transistors or diode.if you are not a tech get one to look at your set.good luck.for further help email me at nicodhem@yahoo.com

Apr 06, 2007 | Pioneer PRO-510HD 53" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

yadayada
yadayada

Level 3 Expert

61203 Answers

zorbrack

Level 1 Expert

19 Answers

Are you a Pioneer Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...