Question about Panasonic KX-TG4500 Phone

1 Answer

First line does not ring..

When you call in on the first of a 4 lines it doesn't ring you can answer it blinks but no ring tone?????
Thanks
Tony

Posted by on

  • 1 more comment 
  • Anonymous Oct 09, 2008

    I receive calls on the other lines just fine. Line 1 will flash, but will not ring. I've tried it on another unit of the same make. Same problem. Contemplating whether or not it might have something to do w/ the phone lines itself or alarm system attached to it. If anyone knows, please let us know. thank you!

  • mcusumano Nov 07, 2008

    Line one and line 4 do no have a dial tone. No calls can be made to or from these lines. I have tried the reset button. Nothing happens. People who have called say that it just continues to ring and does not roll over to other lines.

  • bryan203 Nov 24, 2008

    We have the same problem. 3 Lines hooked up. The phone answers incoming calls on line 1 70% of the time. It will answer calls on Line 2 almost 100% of the time if line 1 is busy. It doesn not held by switching them around. It does the same thing. We have an ordinary handset plugged into an extension on theat line so that we don't miss any of the incoming calls. We love the phone system, but I believe there are problems with the base set. Panasonic was not able to shed any light on the situation.

×

1 Answer

Hit the reset button on the bottom of the base unit and reinitialize your setup.

Posted on Oct 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My phone doesn't have dial tone. Each time I dial a number and try to call,it wont work. I call my phone but it wont ring. I need help on this. What happen to the phone? Or what should I do?


If you have another phone connect it to the wall outlet to see if you get a dial tone. This will indicate if your base unit is faulty.
Check the power adapter to the base unit, make sure it is getting mains power.
If the base unit has dual phone lines and if line 1 is only connected and the line 2 has beed selected then you cannot get a dial tone. In the chase press the line 1 to get a dial tone.
If your base unit has only one line then check the phone line at the wall socket make sure it is plugged in tight, also check the the connection at the base unit.
If this does not work then ring the phone company and get the to test your phone line, you may have a faulty line to your home.

Feb 03, 2012 | AT&T E2116 2.4 GHz Cordless Phone

1 Answer

We have a 4-line system in our office, but it is not working properly. For instant, when line 4 rings...it only comes into one of the phones. All lines are working properly with dial tones. If we would...


Now here's a conflict. Does line 4 work on any other phone where it doesn't ring? You say all lines are working properly wiith dial tones, tnen you say you can't pick it up from another phone.

I don't think these phones have "private lines", but the dial tone comes from the 2nd RJ-14 jack on the wall. On every phone, you could swap the plugs so that line 1 comes into line 3 and line 3 comes into line 1 (you'll lose the intercom) and see if you get dial tone on line 2 which will be the phone that works line 4. The point being to determine if you have a wiring issue or a programming problem.

Carl

Mar 21, 2011 | RCA 25423RE1 Phone

2 Answers

I have the AT&T Model 854 4-line phone. When the phone is plugged in the phone starts toning and won't stop.


Thats because its looking for the intercom number to be assigned. as soon as you assign one in programming it will stop.

Apr 29, 2010 | AT&T ATT-974 Corded Phone

1 Answer

How can I get the dial tone turned back on without lifting receiver? I want to be able to lift the phone and answer without pushing Line 1


To answer a ringing line by just lifting the handset that phone has to be programmed to ring on that line. This is done in the programming mode under 'terminals&sets/show set__/Line Access/Line assignment/Show line:__/...then your choices are: Appear and ring,Appear only, or Unassigned. Choose appear and ring on each line you want to answer from that telephone. Hope this helps.

Bill C. www.dyna-tech.com We also do remote programming and tech support on Norstar CICS and MICS.

Apr 09, 2010 | NorStar M7310 Corded Phone

1 Answer

Exact same problem.


Is this a system phone?

It sounds as though your set is not programmed with a line appearance. and line preference is not set, this can be set for intercom, or a line or nothing when you pick up the phone. You can do a pick up code to answer until an appearance is programmed on your set.

Aug 05, 2009 | Lands Phones

3 Answers

Answer machine


Sometimes there is a switch, sometimes it's a key combination. What's the model number and I can look it up?

Mar 24, 2009 | Vtech 5.8GHz Cordless Phone with Digital...

1 Answer

M7310 - 3 phone set system - line 3 on one set does no ring tone


Feature * 6 is for the ring tone of the set, it doesn't change the cadence (ring tone) on a line...

The only way to change the ring tone on a line... it would require everyone that has that number to change.

You need to go into the programming
-> look for LINE and enter
-> put in 003 for line 3 and enter
-> under TRUNK/LINE DATA find DISTINCT RING and change
-> REL to end programming...

Now that line 3 will ring differently. But it will ring differently on everyone's sets that has line 3 on their phone

Mar 04, 2009 | NorStar Meridian M7310 Phone

2 Answers

I would like Line 6 on Norstar System to Ring Different


Normal 0 To Change your Ring Type:
1. Press the Feature button, then * 6
2. Press the number keys 1 – 4 to hear the different ring types
3. Press the OK softkey when you hear your desired ring

Jan 15, 2009 | NorStar M7310 Corded Phone

2 Answers

We have an se445 cordless phone/answerphone. with answerphone on, the line rings 4 times then stops briefly before continuing to ring instead of cutting onto answerphone. BT line has been checked and gain...


Regarding the Philips SE445 cordless phone/answerphone. I posted my problem where it rings 4 times then continues to ring without cutting into the answerphone. My phone is now fixed and working as it should which is great. I was unable to make calls because I had no dial tone and although Virgin checked my line and said it was fine, it obviously wasn't. The problem was with the line in the Exchange Box - the big green boxes that are located on the roadside - the line was broken there. Once fixed, I had my dial tone and the SE445 is working perfectly. To nomad1066, I would insist that BT check their Exchange Boxes as this is probably where the problem lies. Check whether you have a dial tone. Hope this helps.

Jul 24, 2008 | Lands Phones

Not finding what you are looking for?
Panasonic KX-TG4500 Phone Logo

Related Topics:

473 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Lands Phones Experts

kakima

Level 3 Expert

98796 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

guyvstewart

Level 2 Expert

82 Answers

Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...