Question about Konica Minolta Maxxum 7D / Dynax 7D Digital Camera

1 Answer

My 7d is stuttering?!

O.k. so when I turn it on it immediiately statrs stuttering if I press the focus button it stops and focuses but it won't take pictures. Most of the time the shake warning indicator is visable. I don't really know what the shake warning indicates. The problem persists un changed irregardless of whether anti shake is switched on or off. Please help me I'm dying without my camera. Thanks

Posted by on

  • Anonymous Aug 23, 2008

    Mine is doing the exact same thing and I'm sure I don't have to mention how frustrating this is. Did you get it fixed or find out anything about the problem? Please let me know:)

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 72 Answers

Vibrating sounds, flashing shake indicator, shutter won't release...

It's a fault in the camera and has to be repaired at the shop, Sorry, I know it's not the answer you were hoping for, but it's a depressingly common problem on the 5d/7d forums.


Posted on Jun 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

My Canon 7d will not longer autofocus using any of my lenses (I use TV mode). If I switch to AUTO the autofocus works and I hear the "beep, beep, beep." My lenses are all set to AF


Try cleaning the contacts on the lens mount and the lenses using an eraser. Do make sure that any dust falls outside and not into the body.

Jun 15, 2015 | Canon EOS 7D Digital Camera

1 Answer

I bought the new Tamron 20-200 lens and after trying it on my Canon 7D non of my lenses will focus on that camera. What has happened?


Sure you did not switch to manual focus while testing the Tamron? Sure all settings are correct?
If the Tamron still auto focusses on you 7D, check the forums about this. I know Nikon sometimes messes up the firmware, when a non Nikon lens is used, but not on all camera's. And not with every firmware.
I don't know the 7D enough to check more details, but check everything about the AF settings. I can't imagine your lens did something wrong with the camera.

Jan 07, 2015 | Canon Cameras

1 Answer

Help with focusing with 7d


What is the focussing problem?
The EOS 7d is usually an autofocus camera with a 19-point
focussing system.
Are you trying to override the focus manually?
This is not recommended.
Much of the purchase price is based on the speed and
accuracy of the focus.
Please restate your problem with more detail and information.

Aug 29, 2011 | Canon Cameras

1 Answer

My camera can't focus when i press halfway down to focus before i press all the way down to snap the photo. it is only a problem with my 18-55mm lens. all my other lenses focus and take photos...


First off, try gently turning the focus ring on your lens while it is on auto focus mode (DO NOT force it). Sometimes a minor bump on the lens can cause the focus ring to come off the tracks. Try that and see if the lens start auto focusing again. I find that this solves the issues a lot of the time. If that doesn't give you any results then you'll need to take your lens to an authorized Canon service center for repairs. Hope this helps!

Hiram
Photo Tech Repair Service
110 East 13th Street
New York, NY 10003
212-673-8400

Jul 06, 2011 | Canon EOS 7D Digital Camera with 1855mm...

1 Answer

How to get manual focus on Olympus Camedia C-750 ultra zoom digital camera


TTTTTTTTTTTTTTTTTTTTTTTTITf correct focus cannot be obtained
When the subject to be focused is not on the AF target mark (not positioned
in the center of the composition), you can use the following steps to obtain the
correct focus on the subject. This operation is referred to as "focus lock".
Determine the position of the subject after focusing (Focus Lock)
1 Press the power switch.
• The camera turns on in the shooting
mode.
• The lens extends and the monitor turns
on.
• The orange lamp lights.
2 Turn the mode dial and select a
shooting mode.
"Shooting mode" (P.36)
3 Position the AF target mark on
the subject you want to focus on.
• When shooting a hard-to-focus
subject, point the camera at an object
about the same distance away as the
subject.
Press the shutter button halfway
until the green lamp lights.
• When the green lamp lights steadily,
the focus and the exposure are locked.
• When the green lamp blinks, the focus
and exposure are not locked. Release
your finger from the shutter button, reposition
your subject and press the
shutter button halfway again.
5 Keeping the shutter button
pressed halfway, recompose
your shot.
6 Press the shutter button fully.
Try the above, info from D-535, C-370 and X-450.
I can email you the complete manual if this works.
Regards
Phillip

Sep 12, 2009 | Cameras

1 Answer

Convergence hitacho 61swx10b


To enter digital convergence adjustment
mode without removing the front speaker
grill, please do the following:
1) Press “Magic Focus” button on the front
panel.
2) While “Magic Focus” is running, press
Magic Focus button again to “Stop”.
3) Press “RECALL” or “STATUS” button after
“STOP” OSD appears on the screen to
enter digital convergence mode.
4) Proceed with convergence adjustment
and save the data.
5) Do MAGICS FOCUS sensor initialization.
6) To exit, press POWER button on the front
panel.
7) Normal and through 1080i modes are
stored separately. Each one has it’s own
memory setting.

Aug 11, 2008 | Philips 60P8342 60" Rear Projection...

1 Answer

Minolta Dynax 7D I fined it dificult to auto focus using a 100mm macro lens even with a very sharp subject the lens just keeps running in & out I never had a problem with this & wonder is this a...


I don't know if I can help you. But I will try a guess. Some cameras focus on 1 point and it is not necessary the center. Maybe if you give your camera a point to focus on then keeping your fingers half cocked on the shutter shift the focus off-center to however you want to compose it, then click.
But if it was working properly before and then stopped working properly, did you lend your camera to someone, drop it or subject it to impact? I don't think anything is really wrong but I could be wrong. Have you checked the AF/MF button. Could someone may have accidentally pressed it?
If you are using the macro lens, did you check the camera's distance limits? I understand that the 7D actually focuses faster than the Canon EOS and Pentax. Canon and Pentax need to hunt that's why they take longer.

Jul 22, 2008 | Cameras

1 Answer

7d camera stutter..........


vibrating sounds, flashing shake indicator, shutter won't release...

It's a fault in the camera and has to be repaired at the shop, Sorry, I know it's not the answer you were hoping for, but it's a depressingly common problem on the 5d/7d forums.

Jun 04, 2008 | Konica Minolta Maxxum 7D / Dynax 7D...

Not finding what you are looking for?
Konica Minolta Maxxum 7D / Dynax 7D Digital Camera Logo

Related Topics:

357 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Cameras Experts

kakima

Level 3 Expert

100140 Answers

Willem.
Willem.

Level 2 Expert

354 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Konica Minolta Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...