Question about Whirlpool Ultimate Care II LSQ9549L Top Load Washer

1 Answer

Will not empty at rinse cycle

My washer fills, agitates then when its supposed to empty and rinse it is done. I now have clothes sitting there and am not sure how I will get it drained. Please anyone help me.

Posted by on

  • denphil53 Jun 06, 2008

    I'm having the same problem. Clothes go through the wash cycle and with about 8-9 minutes remaining when the spin cycle should ingauge the machine stops with a full bucket of water and partially washed clothes.

    help ???

  • Anonymous Jun 12, 2008

    I don't hear anything clicking when I open or close the lid. I have the same problem where it fills but doesnt drain.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 868 Answers

Check your lid switch.Make sure that when the lid is lowered you can hear the switch click.

Posted on Jun 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No agitation on extra rinse cycle on Maytag Washing Machine MAV8557AWW


The manufacturer may have found there was little or no advantage to having agitation in the second rinse cycle so omitted it.

Jan 08, 2014 | Maytag Ensignia MAV2757AWW Top Load Washer

1 Answer

Need info about extra rinse cycye


there should be agitation..dont know unless its not making the connection in the control head..

Jan 08, 2014 | Maytag Ensignia MAV2757AWW Top Load Washer

1 Answer

Whirlpool washer model lsr8233eqo


So when the cycle first starts, it will fill and agitate and spin. But then on the rinse cycle it stops?

Feb 03, 2013 | Whirlpool Washing Machines

1 Answer

I have a Kenmore top loading washer model #110 and won't agitate


First, see the Sears parts site for your washer.

http://www.searspartsdirect.com/partsdirect/getModel!retrieve.pd?pop=true&modelNumber=110.23912100

Also see the Whirlpool (Kenmore) Service Manual for top load, direct drive washers.

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/f7e2147fa98b28cf85257122007475cb/$FILE/L-55.pdf


The first thing I'd try is using a different cycle. If the washer works as it should, the problem points to the timer.

I'd also check to make sure that when replacing the switch, the connections to the timer haven't come loose.

Since you've replaced the Lid Switch, the motor has power for the drain and spin cycles.

These washers use a reversing motor. The motor turns one way for agitating and reverses for the drain and spin.

Since you cannot hear anything when it is supposed to be agitating, the problem does point to the timer or motor.




Nov 14, 2009 | Kenmore 22422 Top Load Washer

1 Answer

Does washer drain before the spin cycle starts?


Normally yes. There are around 12 to 20 gallons of water in the tub after the wash cycle, which will be anywhere from 63 to 110 pounds of weight in addition to the weight of the clothes. For the machine to start the spin cycle to remove this water would place a heavy load on the motor, gearcase, pullys, belts, gears, ect. With the water drained, the load is lighter, and much easier to start spinning the excess water out of the clothes. The normal cycles are: Fill, Agitate, Drain, Spin, Rinse Fill, Agitate for rinse, Drain, Spin Cycle and off. Imagine trying to spin a 5 gallon bucket of water over your head, full of water, and then empty. Which one do you think would be easier to do? And safer for you.

Sep 26, 2009 | Admiral AW22 Top Load Washer

2 Answers

Machine fills and agitates, but won't drain


Please empty your machine and run the machine empty. If the washer goes through the whole cycle without any clothes. Please let me know

Jan 19, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Washer fills and spins but does not agitate


Im sorry to say, it sounds like the transmission in the washer may have gone out, the unit it self sits at the bottem of the main agitator shaft under the the tub, you may be able to have this replaced, but shop around for the right price.

Jan 26, 2008 | Washing Machines

1 Answer

No agitation in ge hydrowave rinse cycles


you must unplug the washer for just 1 minute open and close the lid 10 times and plug it back in and put it on a light load cycle and let it wash with empty load. shoul work fine after that

Dec 01, 2007 | Washing Machines

1 Answer

Year old frigidare washer won't agitate


the selector switch might be out.

Aug 08, 2007 | Frigidaire FWTR445R

Not finding what you are looking for?
Whirlpool Ultimate Care II LSQ9549L Top Load Washer Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...