Question about HP Printers & Copiers

1 Answer

My printer C4100 won't turn off when I depress the on button. I fear unplugging as an alternative. Printer is attached to my computer.Regulatory # is SDGOB-0602.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 170 Answers

I believe this machine has a power button on the right side and if so, there should be 2 sections to the right side that need to be removed but this is the order...
1.the right side rear section cover should just slide back and pop off.
2.Then remove 4 screws holding the top cover in place and don't remove the entire thing, just pop it up enough to pull out the front portion of the right side cover and look down inside where the power button is, (do not pull this cover all the way out, just enough to look inside), You should see a metal rod in there that the power button needs to mesh with in a slot. if you push the button back and forth you'll see what I mean. The metal rod needs to be in the center grove when this cover is snapped shut again then your power button should work... put everything back in reverse...Hope this helps, www.bigmoneycentral.com

Posted on Jun 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Canon ip2770 error 5100 and 5200


How to Reset Canon IP2770 Error 5100:

Error 5100 means that the cartridge can not be detected by the printer. Actually the printer is not actually loading the cartridge and showing you the error 5100.
To solve these follow the following steps.

Turn off printer
Remove both the cartridges from the printer
Use a clothe moistened with alcohol to clean the surface contact on the cartridges where the terminals inside the printers touches
Return the cartridges
Turn on the printer.

Error will be removed

How to Reset Canon IP2770 Error 5200:
1. The printer is turned off and plugged the power cord.
2. Press Resume button 2 seconds
then press the POWER button until the green light on (when pressing the POWER button, Resume button ... jgn released first)
3. Then release the RESUME button, but do not release the POWER button.
4. While the POWER button is still depressed, press the Resume button 5 times. Led will light turns green orange with the last glow orange. (Do not be mistaken 4x because the printer will die completely, but it is temporary too) Then ...
5. Release both buttons simultaneously.
6. Led will blink briefly and then will glow GREEN.
7. And the computer will detect new hardware, just ignore ...
8. Press the POWER button, then the printer will die.
9. Press the POWER button again then the printer will flash and ... IP2770 Printer is ready for use.

Other Ways Reset Canon iP2770 error 5200:

1. Turn the printer, and printer will look normal.
2. Run the printer for printing documents or print test, then the 5200 error will appear.
3. Jump unplug the power cord without pressing the on-off
4. Open it and slide it into the middle catridgenya manually (press the white penguncinya hook behind the head, for cartridge can be pulled into the middle)
5. Unplug all cartridges and leave the lid remains open
6. Turn the printer, hit the head will move left and right because the lid was still open and will stop in the middle.
7. Replace the cartridge, and close the correct
8. Your printer will return to normal. (Source: from all existing sources)

I hope this solution will helpful for you
Please don't forget to click on Four thumbs which are given below & then write testimonial for my appreciation if it is helpful
THANKS & Keep Using fixya

Jul 27, 2011 | Canon PIXMA IP5200 InkJet Photo Printer

2 Answers

My canon MX340 won't print, saying there is a printing error 5200. I tried unplugging the printer and turning it off, but it still won't work


Hi,

I will advice you reset your canon printer, Follow this steps to reset your canon printer.

1. Turn off printer.
2. retaining button Resume/Cancel press button POWER - indicator it will catch fire by green color.
3. let go button Resume/Cancel, continuing to retain POWER.
4. press button Resume/Cancel of 2 times, retaining POWER, after which let go all buttons.
5. when indicator will be lit BY GREEN - press button Resume/Cancel of 4 times.
6. turn off printer by button POWER. Power on later to see if that fix the problem.

Jul 11, 2011 | Canon PIXMA MX340 Wireless Office...

1 Answer

I have a C4100 HP Photosmart printer with my sofware and my new computer will not accept it


Access the manufacturer's web-site: http://support.hp.com
Enter 'C4100' and do a search.
Select the Operating System (Windows 7?) used on your new computer.
Download the device-driver.
Install it.
Print a test-page.

Feb 26, 2011 | HP DeskJet F380 All-In-One Printer

1 Answer

New tri-color cartridge has a problem. I can't see what.


I have an HP Photsmart C4100 printer. I purchased remanufactured ink cartridges (both black and tri-colored) from Vivasmart. The black one works fine, but when I installed the tri-color, I got an error message that says "Print cartridge problem" The following print cartridge has a problem:
Tri-color.
And I can't print. The screen on my printer says "Remove and check color cartridge." I have done this several times and it still won't print. I have turned off the power, removed the cartridges, and unplugged the unit, but it still didn't help. Any suggestions?

Jul 21, 2009 | HP PSC 1510 All-In-One InkJet Printer

1 Answer

Hp Photosmart C4100 series (copy 6) printer missing!


Uninstall all those printers first. restart the computer and reinstall the drivers again.

May 25, 2009 | HP Deskjet F4180 All-in-One InkJet Printer

1 Answer

Not printing from computer to photo smart printer.


If the printer has full functionality with C4100 series driver, then keep the current driver.

If some of the functions is not working , then download updated drivers from HP website.

Check the links below:

HP Photosmart C4180 All-in-One Printer

HP Photosmart C4180 All-in-One Printer

Select software and drivers

Apr 10, 2009 | HP PhotoSmart C4180 All-in-One Color...

1 Answer

Cant install my printer


Here is driver download page for your printer, insert OS version and proceed to download page:
HP Photosmart C4100 All-in-One Printer series

Aug 15, 2008 | HP Photosmart C4180 All-In-One InkJet...

1 Answer

Hp officejet d145


I don't believe that I told you to unplug the printer but after looking over your first question it seems to me that either the connection under the button is depressed further into the machine than it should or the connection needs to be cleaned. You would have to open the machine to do this and it may be difficult to get to but is worth a try. Why are you unable to leave the printer on constantly? It should turn on by itself if attached to the computer when the computer is turned on.

Jun 08, 2008 | Printers & Copiers

2 Answers

WASTE INK NEAR FULL


I have the same problem and my power will not turn on if the resume button is depressed. Is there a way to fix the waste ink problem?

Feb 06, 2008 | Canon MultiPASS F60 All-In-One InkJet...

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96467 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...