Question about Kodak i40 Path-Through Scanner

3 Answers

ERROR CODE 8

Just plum not working...

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Problem with lamp you need to replace faceoff lamp thats it

Posted on Sep 24, 2008

  • sanyanand Sep 24, 2008

    more over you can able to access scanning with this error8 condition solution is you need to open the front cover while initializing time after finish initialization error code will be tell 3 and then close the cover this will give error 5 dont worry about this still you can access scanner



    or else you need to replace lamp to fix this problem permanantly

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

E8 means the firmware is corrupt, reinstall the drivers/software

Posted on Sep 15, 2011

Este problema me sigue afectando

Posted on Jun 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Code call for service


so,call for service,they dont put that there to just look at it

Jul 01, 2015 | Toshiba E-studio 230 Multifunction Copier

1 Answer

Mfc465cn-cant print test page,error PRINTER BUSY


I suggest You Go to Official Brother Printer Page For You Brother Printer Problem On Below Brother forum URL Link: How do print network configuration page Brother In Case You Still face Problem and Need Online Assistance Then Please Follow Us For On : Brother Printer Support

Jan 22, 2014 | Brother Any 8 Inks Mfc-465cn Mfc465cn...

1 Answer

Showing error code 8


paper jam but take care if the lamp with any color instead of red it will be no error

Jan 13, 2014 | Xerox DocuMate 162 Pass-Through Scanner

1 Answer

Fujitsu fi-6140 Scanner: Error 8 (help?)


Hello Connor,

Error 8 could be displayed due to:

1. Faulty cable connecting Panel PCA & Control PCA. Check the cables, it might have been pinched somewhere or may be defective. You may cross check by replacing the same with another scanner.
2. Faulty Panel PCA. You may cross check by replacing the same with another scanner.
3. Faulty Control PCA. You may cross check by replacing the same with another scanner.

Hope the above information is helpful.

Thanks & regards,
ScanCare

Jan 09, 2014 | Fujitsu fi-4120C Path-Through Scanner

1 Answer

TOSHIBA E STUDIO 207 ERROR C 44


All error code soloution of fuser unit Fuser Unit Error Status Counter
Purpose
When a fuser unit related error (error code C41, C43, C44 or C45) occurs, the set value of the fuser status
counter varies, depending on type of error.
Displaying and checking the set value of the fuser status counter can analyze a cause for the error. If
any of "2 to 9" is set at the fuser status counter, the fuser unit will not be operated for safety reasons.
After the fuser unit related error is resolved, if "0" is set, the fuser unit will be operated as usual. If any of
"10 to 19" is set at the fuser status counter, the fuser unit will be operated as usual, even if "0" is not set
after the fuser unit related error is resolved.
C41: Thermistor or heater abnormality at power-ON
C43: Thermistor abnormality after abnormality judgment
C44: Heater abnormality after abnormality judgment
C45: Thermistor abnormality during printing
C46 to C49: Reserved
Description
When this code is used, the current set value of the fuser status counter is displayed. Only "0" can be
manually entered, in order to restore the fuser unit to its normal operation, after the fuser unit related
error is resolved.
For further reason why the counter value differs despite the same error code, refer to 5.1.7 or 5.1.8
[Fuser unit related service call] in the Service Handbook.
0: No error 10: C47 (Reserved)
1: C41 (Once) 11: C47 (Reserved)
2: C41 (Consecutively occurs) 12: C48 (Reserved)
3: C46 (Reserved) 13: C49 (Reserved)
4: C43 14: C47 (Reserved)
5: C44 15: C48 (Reserved)
6: C45 16: C49 (Reserved)
7: C44 17: C47 (Reserved)
8: C45 18: C48 (Reserved)
9: C44 19: C49 (Reserved)
* Default: 0
Setting Timing
Use this code to resolve the fuser unit related error (error code C41, C43, C44 or C45). Resolve the
error, and set "0" (or reset the counter), in order to restore the fuser unit to its normal operation.
Caution
Remember to resolve the fuser unit related error, and then reset to "0."

Jul 08, 2012 | Toshiba E Studio 207

1 Answer

I have a canon mp250 the printer & copier work fine but i can't scan. This is the error that comes up. Internal error occured Scanner driver will be closed Code: 5,202,54 what should i have to...


ive been resolving that issue for almost 8 hours since last night.(that means i did not sleep) because i badly need to scan papers for my precentation today. finally it worked after unstalling all canon folders, then reinstall everything... hope this work with you

Aug 05, 2011 | Canon Office Equipment & Supplies

1 Answer

I have fujitsu 4120c and it doesnot work,it have error 8.can anybody help me


Hi,


Error code 8 means the SCSI fuse is blown off. This alarm is detected during initial processing immediately after power-on.


Probable causes:
- Defective SCSI cable
- Other SCSI device malfunction


Check if the SCSI cable or other SCSI devices connected to the scanner cause this error.The scanner can work even after this error occurs.


If the issue persists, you may have to contact Authorised Fujitsu Engineer to rectify the error.


Hope the above information is helpful.


Thank you for contacting Fixya.


Regards,


TechSatya

tech.satya@gmail.com

Nov 13, 2010 | Fujitsu fi-4120C Path-Through Scanner

2 Answers

Error 8 in scanner i40


Error 8 = Face up light check failure.
Check Top Lamp is lighting up and not Flickering.
Check connections to Ballast (Inverter) and Lamp.

Jun 30, 2009 | Kodak i40 Path-Through Scanner

2 Answers

Power On indicator Flashing, Scanner won't scan


It could be anything, when there's a hardware malfunction, the scanner just will not allow any action. As it is also an old scanner, any documentation of LED error codes will be long gone, too. It's a shame when well built peripherals die.

Sep 07, 2007 | AcerScan 620U Flatbed Scanner

1 Answer

Kodak I-40 Scanner


8 Face up light check failure is the only code listed, not "88" for this model.

If code 8, the top lamp may well be occasionally flickering. Could be the Lamp or the Inverter (Ballast) check connections to lamp.

Jan 12, 2007 | Kodak i40 Path-Through Scanner

Not finding what you are looking for?
Kodak i40 Path-Through Scanner Logo

Related Topics:

1,912 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18331 Answers

Michel Smith

Level 3 Expert

1218 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...