The instructions should be on the installation CD. Put the CD in your drive and open the readme file. This should tell you where you can get the information you need. If you don't have the CD try the lexmark web site. The support section should have downloadable copies of the user guide.
Using the printer control panel
1. Open the top cover, and then load an original document face
down on the scanner glass.
2. Close the top cover to avoid dark edges on the scanned
image.
3. Make sure that the printer is connected to a computer,
and that both the printer and the computer are on.
4. From the printer control panel, press the scan button.
5. Follow the instructions on the computer screen.
Using Windows
1.
Open the top cover, and then load an original document face down on the scanner
glass.
2.
Close the top cover to avoid dark edges on the scanned image.
3.
Do one of the following:
•
In Windows Vista, click > All Programs, and then select the printer program
folder from the list.
•
In Windows XP, click Start > Programs or All Programs, and then select the
printer program folder from the list.
4.
Click Lexmark Productivity Studio.
5.
On the main screen, click Scan.
6.
Follow the instructions on the screen.
Using Macintosh
1.
Open the top cover, and then load an original document face down on the scanner
glass.
2.
Close the top cover to avoid dark edges on the scanned image.
3.
From the Finder desktop, double-click the printer folder.
4.
Double-click the 2600 Series Center.
5.
From the "What is being scanned?" list, choose the type of document to be
scanned.
6.
Click Scan.
303 views
Usually answered in minutes!
×