Question about E-Machines eMachines Desktop PC

2 Answers

Emachine problems My emachine is a couple of years old. It has always worked great until this weekend. When you push the button to turn on the computer, the fan starts going fast and loud, but nothing else happens. The fan will stay on until we shut the computer down. The moniter is not showing a connection to the pc as well. Please let me know if you have any ideals.

Posted by on

  • pstanton2 Oct 01, 2008

    My emachines fan comes on loud, but nothing else. Unplugging the power cord and other connections does not seem to solve the problem.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My emachines is couple of years old but has ran great until now. We had a power outage and ever since then it will not come on, there is nothing. I have replaced the power supply and the mother board and still nothing.Could it be my processor?? model number EL1352G. Help anyone...mamatig

Posted on Feb 24, 2013

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi..

Since your computer is working but no display at all. Hope this steps would be helpful in your problem.


1. Turn on your computer, If the problem works again and no display.

2.Turn off your computer by pressing long your power botton until the fan stops properly.

3. Unplug you computer 220volts power chord at the back of your computer.

4. Reconnect again the 220volts power chord after 1 minute.

by. arnold@supportsave.com


Posted on Jun 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I hear two beeps when i conect power suply on my emachine t5212 model


Very sorry about your son.

If you can't find the real problem, you can always put that hard drive into another PC to get the files. If so, be sure to looking to a potential "jumper" setting on that drive for it to be recognized.

May 05, 2012 | E-Machines T5212 PC Desktop

1 Answer

Restore emachine W1136 desktop to factory settings without disc


I guess you can try it again to make it not able to start up such as to rename some important windows file. Always a good option to backup first.

You can chat with emachine tech on the following page.
http://emachines.com/support/answers.html

They might be glad to help. Someone might be always a little bit more courteous than others. You can reward them a most satisfactory feedback anyways.

Someone tried the Alt+F10 to get that restore option, I guess it might work with your emachine too. You might like to try it while starting up the system too.

Something to try if you didn't.
(1) Go to start menu
(2) Click on all programs
(3) click on Emachine
(4) click on Emachine recovery management
(5) Click on restore on the bar across the top
(6) click on restore to system factory default

Did you try the number key while starting up or the R key or maybe with the Alt key? Hope that help.

Jul 08, 2010 | E-Machines eMachines Desktop PC

1 Answer

I have an emachine that is 5 years old. Always


YOUR PSU (POWER SUPPLY UNIT) MAYBE THE CULPRIT. If the power to your cable which fits the computer is ok, then the supply unit is usually at fault. You can buy these pretty cheaply on ebay and they are very easy to fit, or if you are not into that find a mate who can! beleive me... its pretty easy.

Jan 04, 2010 | E-Machines eMachines Desktop PC

1 Answer

I have a 2 year old emachine that will no longer stay on. It was turning off by itself and slowly got worse and worse until it won't stay on at all. Any ideas? Virus?


Not likely.
Sounds more like an overheating problem.
I'll suggest to clean all the fans from dust and lint.
You may also need to apply a fresh heat release compound on the processor.
You may need professional help for this, but this will solve your problem.

Don't forget to rate this answer if it helps

Dec 27, 2009 | E-Machines eMachines Desktop PC

1 Answer

Cant connect to internet with emachine through lynksys router.


you will have to add an ethernet card to your emachine if it will take one, or you might be out of luck

Apr 04, 2009 | E-Machines (T2958) PC Desktop

1 Answer

Contrast/menu/screen resolution box wont stop flashing on screen.


try to clean around it's exit button sounds stuck
or unplug monitor for about 20 minutes
if the problem persists i would reinstall driver

Jan 09, 2009 | E-Machines eMachines Desktop PC

8 Answers

Emachine restore back to factory settings


Hello,
I had to restore my Emachine. I have Windows Vista
(1) Go to start menu
(2) Click on all programs
(3) click on Emachine
(4) click on Emachine recovery management
(5) Click on restore on the bar across the top
(6) click on restore to system factory default

It takes about 20 mins.

Sep 07, 2008 | Computers & Internet

1 Answer

EMachine T3025/Best Buy


get simple windows xp you just have to format deep with emachines as ntfs ive ran windows complete programs on emachines with out a problem and created straight recovery disk simple to be ran in windows safemode
now your hard drive
depending on which brand hard drive you have there is a couple out there that have data compression problems over 80 gig these harddrives over 80 gig have a crash ratio of 8 to 1 sea gate about 2 years ago had this problem dont know if they corrected it yet
quite possible your hard drive did not die at all but the power supply just didnt have the juice to push it check hdd by another source of power

May 12, 2008 | Computers & Internet

1 Answer

EMachine desktop


If I had to guess Fn would be a misprint for one or F1 since that is the "HELP" button in most programs. Probally not very helpfull just throwing it out there.

Dec 11, 2007 | E-Machines eMachines Desktop PC

Not finding what you are looking for?
E-Machines eMachines Desktop PC Logo

Related Topics:

404 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18334 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...