Question about Kenmore 24 in. 16539 Built-in Dishwasher

1 Answer

Kenmore 16359 this ca12. i saw your solution and thanks but i have a question before i change the console. the machine was working fine and we went on vacation and when we came back that is when the light was blinking. could that have caused it or does the consoles just go out? i would like to know so when i repair it i don't break it again. i looked at the possibile fixes prior found the console but not clear if the circuit board comes with because the circuit board in no longer availible. is it worth repairing?????

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 413 Answers

'Membrane buttons' as they are so called, just go bad. The circuit board is not part of the switches. circuit board not available? Chances are this part has a substitution that is available. Many models of this type have consolidated to 1 or 2 standard circuit boards and have obsoleted the originals.

Posted on Jun 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lock light stays on. Cannot use dishwasher?


Hi


Thanks for using FixYa. To turn off the lock press and hold the Heated Dry button for 10-15 seconds. If this does not help the unfortunately you’ll have to replace the control panel.
Please do accept the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Jun 07, 2010 | Kenmore 24 in. 16352 / 16354 / 16359...

1 Answer

Kemore Elite Dishwasher Spews Water When Wash Cycle Begins


After further inspection of my dishwasher I found a bad gasket under the lower wash arm. Over the years it finally gave up and was shooting a torrent of water through the water in the bottom of the wash tub. When all that water hit the door liner it went up into the lower door vents, into to wire harness, and onto the floor.

Sep 06, 2009 | Kenmore 24 in. 16352 / 16354 / 16359...

1 Answer

Kenmore 16359 dishwasher


The blinking buttons indicate the buttons are bad. The console will have to be replaced.

May 30, 2008 | Kenmore 24 in. 16352 / 16354 / 16359...

3 Answers

Kenmore Oasis Beeping


That annoying beep you are talking about is the Cycle On/Off alarm, right? If so...this is a common problem with the Oasis. The only cure I know of is the replace the Interface Control Board behind the console. Now, you mentioned that the machine started up AFTER you removed the console (?), top (?). That sounds like you have a loose or dirty connection between the Interface Control Board and the Main Control Board. There should be a single plug in harness going to the console to the Main Control Board. With the machine unplugged, try disconnecting the harness at both ends and cleaning the contacts. This may resolve what I believe to be a connectivity issue, and may even cure the annoying "beep". However, I personally have yet to find an easy fix for the alarm problem. It is caused by a defective relay on the Interface Control Board, and the board is not serviceable. That is why is has to be replaced. I wish I had better advice for you than that. Sorry...I hope this helps some.

Aug 02, 2007 | Kenmore Oasis HE 27082 Top Load Washer

Not finding what you are looking for?
Kenmore 24 in. 16539 Built-in Dishwasher Logo

Related Topics:

268 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

D. E. Hev

Level 3 Expert

1167 Answers

Fred Sops

Level 2 Expert

272 Answers

Cindy Wells

Level 3 Expert

4946 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...