My Canon camera SD 1200 IS lense won't come out. It says "Lense error, restart camera" Where can I send it to get fixed??

Zoom lenses - stuck in its housing or fully extended are caused by factors like - knocks, dead butteries debris or some form of corrosion .
This is a risky method and I would recommend for the last option, if other conventional methods don't work.

Provided your lens has collapsed into its housing - you try a little knock on the camera with your palm while pressing the on/off button. If that does not work, you are on your own - to decide.

Try these procedures.

Go to this website for solutions:

http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

Try the procedures in this tip.

Try these procedures.

If it's "lens error", then check your lens for damage or being jammed.
If it's "lense error", then I don't know what a lense is.

Try these procedures.

Hi,

Checkout this tip about digital camera error messages


Lens Errorfix for Digital Camera

heatman101';



'

on the camera bottom by the battery theres is a little niddle size reset button press it wit niddle when camera is on then it will restart to factory setting you can try more then ones pushing it.please leave comment,vote,note.thankyou

This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html