Question about RCA P52937 52" Rear Projection Television

1 Answer

Changes Channels My Tv worked fine the other night when we went to bed. Woke up the next morning and it was on falshing back and forth between channel 15 and 30. We can not use any of the buttons on the front of the TV except the power button and the remote won't work the TV either. Anyone have this this problem?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 47 Answers

Need to know model number and date of manu.  You may have bad control assy due to spills or cleaning of screen and liquid went into screen and buttons. will effect remote also
www.classtorations.com

Posted on Jun 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My televisions picture is 3D like the colors have seperated


This is a common problem on this model. Call in a shop or do it yourself with parts and instructions from www.TvRepairKits.com

May 08, 2010 | RCA R52WH73 Projection Television

1 Answer

TV Changes Channels on its own


On the front panel board power/ch-/ch+ vol-/vol+ replace contact switches replace all of them.For some odd reasons these contact switches just keep going out they had alot of them bad.

Feb 16, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

2 Answers

My Ant A Input Not Working


Good Day, babt;
TRY THIS:

MAY ONLY BE ABLE TO SELECT ANTENNA A AND B. WITH THE REMOTE CONTROL PRESS MENU, SELECT "SET UP" AND THEN "AV CONNECTION HOME THEATER" SET "AV NETWORK" TO "OFF" AND "TV LOCKED TO INPUT 1" TO "NO" THEN EXIT THE CUSTOMER''S MENU, TURN THE UNIT OFF UNPLUG IT AND THEN PLUG IT BACK IN, IF THE PROBLEM RETURNS AN E2 RESET IS NEEDED. ACCESS THE OPTION MENU BY PRESSING "MENU 1, 3, 7, 0", USE THE ADJUST BUTTON TO SELECT "E2 RESET" AND PRESS "QV". IF THIS IS NOT RESOLVED BY THE E2 RESET REPLACE THE EEPROM, IC701 PART # 275P163010. THE E2 RESET IS ALSO NECESSARY AFTER REPLACEMENT OF IC701.
Good Luck, big IRISH.

Aug 06, 2008 | Mitsubishi VS-50603 50" Rear Projection...

1 Answer

Picture black out


Like your computer a tv has the same type of circuits, & sometimes they get glitches, maybe, but i feel you might be starting to have a problem in the 'DMD" board in your tv. Maybe not; unplug tv for 10 min to 24 hrs. I am a mit factory auth tech. good luck,.

Jan 05, 2008 | Mitsubishi WS-55311 55" Rear Projection...

1 Answer

Remote stopped work for my kp-61hs10


Sounds to me like a problem in the tv, not the remote. A short maybe, or a bad connection somewhere.

Dec 22, 2007 | Sony KP-61HS10 61" Rear Projection...

1 Answer

No pic but sound :/


You are having a high voltage problem. Quite possibly in the horizontal deflection. I would check the horizontal output and regulator transistors.

Sep 27, 2007 | Toshiba 40H80 40" Rear Projection...

1 Answer

Convergence issue


You can go back to factory settings by pressing and holding the ACTION and POWER buttons on the TV while it is on. A CHK screen will appear and when it does release the buttons and then power the set off then on again. This had reset all settings back to factory conditions. You will have to reprogram any channels into memory after this.

Mar 29, 2007 | Panasonic PT-51G44 51" Rear Projection...

Not finding what you are looking for?
RCA P52937 52" Rear Projection Television Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you a RCA Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...