Question about Compaq PC Desktops

1 Answer

Need diagram for compaq mother board UWAVES2, so I can find the location for where the led, hdd and other wires need to be connected.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 458 Answers

No you will need to get the manual for the computer that the motherboard came out of for that. Anyone could have made that board. Compaq did not make that board or any other board as far as that goes. Contact Compaq if you do not know what system that it came out of and they might try to help you if they speak English and understand it. Good luck on getting an American. I personally would only figure out where the power plug goes and forget the rest. You need to find a needle in a hay stack. Compaq probably does not even know where the plugs go or what motherboard it is. We do not have any way of knowing that. I did a google search and did not find anything but this question. You will have to probably have to go to a computer store that sells Compaq - HP (Same company) and see if they know. Good luck

Posted on Jun 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need the wiring diagram for emachine model D6405


Usually it is in very small print right on the motherboard next to the pins, use a flashlight and/or a magnifier to see what order the pins go in. The hard drive light will say HDD, power will say PWR, etc.

Nov 26, 2011 | E-Machines eMachines Desktop PC

1 Answer

Red light on hp compaq 6000, should have a soild green light.


yes it should but it could also be hdd or memory or processor or the led are connected wrong on the mother board so I suggest that you take your time and pull down that pc and make sure you follow the necessary safety precautions and look at the mother board and fit it up slowly ok

Oct 03, 2011 | HP Compaq 6000 Pro Small Form Factor PC...

1 Answer

Configuring motherboard powerswitch leds reset


u will find front pannel connection pins on mother board. its in 2 lines. in onle row there is one pin slot idle. next to that vacant pin slot u insert reset sw, next to it insert hdd led, behind hdd led insert power led, next to power led (behind reset sw) insert power sw. thats it done


Jan 06, 2010 | Dell Dimension 2350 PC Desktop

1 Answer

Hello all: emachine T3882 wiring diagram


Look very closely at the motherboard where the wires go... maybe with a magnifying glass . should say what wires go where. ie. (hdd led,reset, pwr. etc) if you reverse the wires.. just switch them back. its just for indicators.. also u could google the mainboard model number or search acer site for led pinout on mainboard.

Dec 16, 2009 | E-Machines eMachines T3830 PC Desktop

1 Answer

Power Button wire to mother board power led power sw HDD Led . what pin connects to the three wires from power button. Led Power wire to what pins, HDD Led to what pins and power SW to what pins on the...


There are may motherboards, but most have writing on them as to what is suppose to plug where. For example, for the power switch, the lettering might be "Pwr" or "Power" or "Pwr sw". The pins are usually together and should fit the plug on the end of the wire.

Nov 25, 2009 | E-Machines eMachines Desktop PC

2 Answers

Front panel motherboard samsung harappa-30 PBA:BA59-00905A


i wont to sound drivers for polaris motherbrod

Jun 12, 2009 | PC Desktops

1 Answer

T6410 EMACHINE TRYING TO CONNECT START BUTTON


The motherboard in your computer is an MSI MS-7145, which is also called RS480M. You can download a copy of the manual here. The front panel connections are on page 2-20.

Looking at the header JFP1, pins 1 through 9 (odd numbers) are the front row, pins 2 through 10 are the back. Pin 10 is the missing pin. The power switch connects to pins 6 and 8. The power LED connects to pins 2 and 4. The HDD LED connects to pins 1 and 3. The reset button, if used, connects to pins 5 and 7.

May 13, 2009 | E-Machines eMachines Desktop PC

2 Answers

Reset/power/led etc..lead connections


on most motherboard it is possible to read there to set the wires.
hope this helped a little.

May 15, 2008 | Compaq Presario 5000 PC Desktop

1 Answer

I unplug the power led, power sw and HHD led


Gateway's support site should have a nice diagram for you in your manual--they are also quite helpful if you have trouble locating it.

Apr 05, 2008 | Gateway 3250X Media Center PC Desktop

1 Answer

Wiring a P4M80-M4 mother board


You can download the manual for the motherboard here, just click on the "manual" link:

http://www.biostar.com.tw/app/en-us/mb/driver.php?S_ID=246

This will list the front panel connections, which are 2 pins. Each of the jumpers, what you are calling clips, will connect two of the pins. Most cases have the jumpers labeled, i.e. power, reset, etc. But if they are not, it is usually: red/white = HDD led; green/white = power led; red/black = speaker; black/green = power switch; and black/white = reset. But your case may use a different wiring spec, but should list somewhere which wire is for which function.

Feb 28, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Compaq PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Compaq PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...