Question about Motorola Mobility RAZR V3

1 Answer

"Operation Failed" on start up

My phone has started turning itself off randomly and every time I start it back up I get "Operation Failed" twice during its start up routine. Otherwise it seems to work just fine. I haven't installed any software on it since I got it and I've taken like 2 whole pictures in its lifetime. Thoughts or suggestions?

Posted by on

  • challahalla Dec 11, 2008

    My Motorola phone locks on startup screen...help! I turn it on and it locks up on the Hellomoto screen. It will not go away until I take out the battery.

  • Anonymous Dec 28, 2008

    hellomoto screen will not go away upon start up

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 94 Answers

Change the battery and clean the tips, where the battery connects and try2 reset u\r phone its secorty code ic 00000.reply me

Posted on Jun 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Casio - 120 Turns itself off randomly


Casio CDP has Auto Power Off: 30 minutes after last key operation, Auto Power Off can be disabled.
Please read the manual.

Jan 06, 2014 | Casio Music

1 Answer

Code p1494


Sounds like a leak in pump switch and miss fire on 1 and 6 could be do to this and or injector on 1 and 6

Apr 18, 2013 | 2000 Jeep Cherokee

2 Answers

My car will automatically shut off and than wont start. HELP!!!


The cats should not cause the engine to die and not restart.
They could cause rough running, or lack of power.
If the check engine light is on you should have the computer scanned for trouble codes. The codes might help you find the problem area.
Usually the problem is a faulty relay or other electrical part, or loss of fuel pressure. Someone would need to narrow down the range of causes.

Oct 15, 2012 | 1996 Mercury Sable

1 Answer

My phone keeps calling random ppl from my contacts, it cuts calls off by calling the person im speaking to, sends blank txts then locks the keyoard so i cant type txts, voice command starts by itself then...


You could try backing everything up and doing a master reset, but back everything up first (its so important I said it twice). to do master reset just dial *#7370# and accept. after the master reset you can restore your files by restoring it from the back up.

Jan 15, 2011 | Nokia 5800 XpressMusic Smartphone

2 Answers

How do i format Sony Ericsson W910i


My phone have problems :

1. when i try to open games or application list from desktop, the phone display "operation failed"

2.the Walkman icon on desktop cannot be executed , same with the Walkman button ( when i press the button or icon , nothing happen)

3.the "operation failed" msg are also diplay when im trying to run SensMe function

Can i do the formating on my own computer? how to do it? will it fix the current problem? or is there any other method i can use without formatting?

PLEASE HELP ME..Thank YOu!

Dec 30, 2009 | Sony Ericsson W910i Cellular Phone

1 Answer

Hitachi RAS09UH randomly pops 15A circuit breaker


Two things that you could check: 1) If you have access to an ampmeter, determine if the unit is drawing over over 14 or 15 amps, 2) replace the suspect circuit breaker in case it is beginning to go bad. Breakers only trip for overcurrent conditions or failure of the breaker itself. If it is pulling close to 15 amps, then it could heat up over time and trip.

Jul 09, 2009 | Hitachi RAS-09UH Air Conditioner

1 Answer

LG KS360 phone on button not working :\


you need to master reset your phone and also update your software settings

Apr 17, 2009 | LG KS360 QWERTY Keyboard Phone BRAND...

1 Answer

Keyless control not work


here ya go follow the steps exactly and it will work and dont forget to rate me please,

* Remote programming

Start with drivers door open, unlocked, and no key in the ignition.
Insert and remove the key from the ignition switch twice within 5 seconds.
close and open the driver door twice within 40 seconds.
Then insert the key into the ignition key cylinder and remove it.
Close and open the driver door twice within 40 seconds.
Then insert the key into the ignition key cylinder and close the door.
Turn the ignition switch from LOCK to ON and back once and remove key
Locks should cycle once.
Within 40 seconds press the LOCK and UNLOCK switches on the transmitter switch simultaneously for 1.0 – 1.5 seconds.
Within 3 seconds after the previous operation, press either one of the switches for more than 1.0 seconds.
Within 3 seconds after the transmitter switch has been turned OFF, the LOCK–UNLOCK operation will be automatically performed once if the registration of the recognition code of the transmitter is completed correctly.
In case the LOCK–UNLOCK operation is performed twice, the registration of recognition code has failed.
Perform the registration procedure from the beginning once

Feb 03, 2009 | 2005 Toyota Camry Solara

1 Answer

Games and applications "operation failed"


Yeah I'm having the same porblem. When i try to start any applications or games menu i get a pop up saying application failed. I'v formatted both my memory card and phone memory and reset the phone but to no avail> ARGGGGHHHH!!!

Can someone please send me the solution and if it iis a recurring problem in many K800is will i get my money back?

Mar 30, 2008 | Sony Ericsson K800i Cellular Phone

2 Answers

Freezer's power is dead


check the plug itself may be melted. next check the cord itself at terminations inside the freezer compressor section. if it's plugged into a gfci try resetting the gfci receptacle. check breaker, may have tripped off.

Aug 20, 2007 | Whirlpool 17 cu. ft. / 481 liter Upright...

Not finding what you are looking for?
Motorola Mobility RAZR V3 Logo

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Cell Phones Experts

D. E. Hev

Level 3 Expert

1167 Answers

Lawrence Oravetz

Level 3 Expert

8710 Answers

Are you a Motorola Mobility Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...