Question about Konica Minolta magicolor 2400 Laser Printer

1 Answer

Toner showing empty

I have refilled my yellow cartrige and replaced the chip and it shows full on the indicator.
The screen tells me to replace the yellow cartrige.

Help me.

Mary
saddle@centurytel.net

Posted by on

  • Anonymous Jun 07, 2008

    error light keeps blinking. Status display on computer screen keeps changing to replace a different color. Have replaced all ink cartridges within a short time and cannot get rid of the blicking error. Uugh!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 214 Answers

First, if you refilled your toner, the printer will always tell you, that you are not using original toner and red light will blink. second, if printer tell you every time to replace different color, then you need to clean a chip reader and chips on toners. take out all toners and pc drum. under toner rack there is a chip reader, clean it with pressure air and reinstall

Posted on Jun 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Konica Minolta 1580-MFP how to reset replace low toner message printer ?


  • Purchase OEM toner, toner has chip on it chips say toner case is empty it is empty you replacing the toner will not fix that

May 04, 2016 | Konica Minolta Printers & Copiers

1 Answer

How do I reset the alert light still on to off ? after refill black toner ?


Replace the chip, or mite have a RFID chip then you need a new cartridge

Nov 18, 2015 | Ricoh Aficio Sp C222dn Color Laser Printer...

1 Answer

Always showing toner replace


Did you replace the toner cartridge or attempped to refill it if refill the cartridge have chips on them when they are done tell the printer they are done, refill is not messing with the chip So get a new one OEM not 3rd party

Aug 25, 2015 | Printers & Copiers

1 Answer

Get rid of the error message "toner empty stop" after replacing the cartridge with a new Samsung cartridge?


After replacement with OEM cartridge it will never show Toner empty

however refil cartrdige will show the same , You need to replace the chip to remove the empty indication

Oct 01, 2014 | Samsung Printers & Copiers

1 Answer

Minolta 2430dl, cyan, magenta, and yellow toner cartridges all show empty. Black shows 42% remaining. How do I get printer to print?


Some printers will refuse to print _anything_, until you replace/refill _all_ of the empty toner cartridges. So, replace/refill.

Dec 30, 2009 | Konica Minolta Printers & Copiers

2 Answers

Installed new black toner but it still indicates it is empty and nothing will print!


Did you install a brand new cartridge? Or did you refill the old cartridge?
Ricoh has "smart chips" in the toner cartridges, and those tell the printer how much toner is used. If you refill the toner,the smart chip must BE REPLACED, the old chip will remain stuck at "empty".
Sucks, that Ricoh for you. That why that printer was $160 on Woot. LOL.
(Yea, I got suckered in too...)

Oct 13, 2009 | Ricoh SP C220N Aficio Laser Printer

2 Answers

Samsung scx-4200 refilling second time


CAN I RESET MY SAMSUNG SCX4200 TONER CHIP MANUALLY BY SOLDERING

Jul 05, 2009 | Samsung SCX 4200 All-In-One Laser Printer

1 Answer

About Nashuatec Aficio SP 3200SF question


You could try going into the sp modes and check sp 5052-1 this is for independent toner check if the toner cartridge was checked by the copier as empty and you refilled it the machines check of the chip still senses it empty by turning this off it could reset it for you .. I have had some mixed results sometimes it works only occasional failure.. Hope it helps Good Luck A

Jul 03, 2009 | Ricoh Printers & Copiers

2 Answers

Black Toner replaced


Replace Toner with gen cartridge.

 

Or Take cartridge back as faulty after checking that it was opened and installed correctly.

 

Check display on printer for indications that maybe it needs one of the 3 colour toners indicators are Y,C or M

 

K is black

Oct 20, 2007 | Epson Aculaser C1100 Printer

Not finding what you are looking for?
Konica Minolta magicolor 2400 Laser Printer Logo

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Printers & Copiers Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5695 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

George Mclaughlin

Level 2 Expert

330 Answers

Are you a Konica Minolta Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...